Corrosion

Even after refining, products can contain certain sulfur compounds originally in the raw crude oil. These compounds can have corrosive effects. For this reason many fuel specifications require a copper strip corrosion test. For example, Astm D130 is required in the D396 Specification for Fuel Oils, D975 Specification for Diesel Fuel Oils and D1655 Specification for Aviation Turbine Fuels. Higher vapor pressure products (greater than 18 psi) require the ASTM D1838 method.

Stanhope Seta sells specifically designed baths, sample tubes, pressure vessels and other accessories associated with these methods.

SETA COPPER/SILVER CORROSION BATHS
ASTM D130; D4048; D4814 Annex

A range of stirred water, oil filled or solid block baths featuring digital temperature control to an accuracy ±0.1°C. All baths are manufactured from stainless steel and have a stainless steel top plate with multiple positions for test stations. Each position is equipped with a lid with an integral hook for suspending either a copper corrosion test vessel (Seta 11500-0) or a test tube support (Seta 11420-0). A test tube support can hold up to three test tubes (Seta 11590-0). Any combination of copper corrosion vessels and test tube supports may be used. The Oxi-Cor can also accept up to three oxidation test vessels.

COPPER AND SILVER CORROSION

11300-0 & 11305-0 SETA HIGH TEMP CORROSION BATHS

11300-0 & 11305-0 SETA HIGH TEMP CORROSION BATHS

Ambient +5° to 100°C temperature range Copper and Silver corrosion tests...

11308-0 Seta Copper Corrosion Solid Block Bath

11308-0 Seta Copper Corrosion Solid Block Bath

A precision processor controlled block heater bath with 4 test wells...

Seta Copper Silver Block Bath, Part Number 11310-0

Seta Copper Silver Block Bath, Part Number 11310-0

The Seta Cu/Ag Corrosion Solid Block Bath is specifically designed for measuring Thin silver...

11400-6 Seta Copper/Silver Corrosion Bath

11400-6 Seta Copper/Silver Corrosion Bath

The 11400-6 is an oil filled bath with a maximum temperature of 150°C and...

15550-2 SETA Oxi-Cor Bath

15550-2 SETA Oxi-Cor Bath

The Oxi-Cor Bath, when used with the relevant accessories, is an...

Seta Corrosion Test Bath, Part Number 22220-5

Seta Corrosion Test Bath, Part Number 22220-5

The Seta Corrosion Test Bath is a stainless steel water bath which accommodates...

Silver Corrosion Test Kit for Gasoline - ASTM D7671, Part Number 11515-0

Silver Corrosion Test Kit for Gasoline - ASTM D7671, Part Number 11515-0

The Silver Corrosion Kit comprises all of the accessories required to carry out...

Rust Test ASTM and NACE

Seta Rust Prevention Test Bath, Part Number 11200-6

Seta Rust Prevention Test Bath, Part Number 11200-6

The Seta Rust Prevention Test Bath indicates the ability of steam turbine oils...

  • 12692 Sandy Drive,  Suite 116  Granger, IN 46530
  • 574-271-7020
  • This email address is being protected from spambots. You need JavaScript enabled to view it.