574-271-7020 support@lazarsci.com

Penetrometer Accessories

 

The Penetrometer is supplied with standard plunger and 50 and 100 gram plunger weights. Cones and needles, as well as sample containers must be ordered separately. Since the penetrometer is part of methods for grease, asphalt, petrolatum, waxes, confections and other various food items; needs will vary from method to method. A partial list is shown below and you can contact us if you do not see the specific accessories you need.

Seta ASTM-IP Standard Cone

Part Number 18051-0, Conical body of acetal hardened steel tip. Stem diameter 3.17mm (1/8 inch). Mass = 102.5g ±0.05g, with NAMAS certification to IP 50 only.

Seta ASTM-IP Optional Cone

 

Seta ASTM-IP Optional Cone

Part Number 18000-0; Conical body of brass hardened steel tip. Stem diameter 3.17mm (1/8 inch). Mass = 102.5g ±0.05g.

 

Seta ASTM-IP Optional Cone

Part Number 18050-0; Conical body of brass hardened steel tip. Stem diameter 3.17mm (1/8 inch). Mass = 102.5g ±0.05g, with NAMAS certification to IP 50 only.

Seta ASTM-IP Standard Cone

 

Seta ASTM-IP Standard Cone

Part Number 18140-0; Conical body of acetal hardened steel tip. Stem diameter 3.17mm (1/8 inch). Mass = 102.5g ±0.05g

Seta Half-Scale Cone

 

Seta Half-Scale Cone

Part Number 18060-0; Conical body of brass stem 3.17mm (1/8 inch) diameter for use with Light-Weight Plunger 17380-0 or 17301-0. Mass = 22.5g ±0.025g.

 

Seta Quarter Scale Cone

Part Number 17910-0; Conical body of plastic with hardened steel tip and shaft for fitting to Seta Plungers 17950-2 or 17302-0. Total Mass with 17950-0 = 9.38g ±0.025g

 

Seta Ultra Light-Weight Plunger

Part Number 17950-2; For use with 17910-2 Quarter-scale cone 8.3g ±0.0125g mass

 

Seta Sample Container (Petrolatum)

Part Number 18120-0; 102mm diameter, 65mm deep, Water tight cover, Cylindrical with flat bottom

Penetrator Kit No 1

 

Penetrator Kit No 1

Part Number 18101-0 Method: ASTM D5; Kit comprises 47.5g plunger, 50g weight, 50 containers, transfer dish, 3 standard bitumen needle Typical samples: bituminous materials, confectionery, cosmetics, soap, yeast, chocolate, lipstick, compact powders

Penetrator Kit No 2

 

Penetrator Kit No 2

Part Number 18102-0 Method: ASTM Micro; Kit comprises 5g Micro cone,15g Plunger, Micro grease container (3 part) Typical samples: lubricants, solid or semi-solid pharmaceutical/cosmetic creams

 

Penetrator Kit No 3

Part Number 18103-0 Method: Klein Micro; Kit comprises 7g Micro cone, 16.8g Plunger, Micro grease container (3 part) Typical samples: lubricants, solid or semi-solid pharmaceutical/cosmetic creams

 

Penetrator Kit No 5

Part Number 18105-0 Method: Pin needle; Kit comprises 15.0g plunger, 2g weight, 3 brass pin needles, 3 stainless steel pin needles Typical samples: putty, fruit, viscous pastes, cheese

 

Penetrator Kit No 6

Part Number 18106-0 Method: Cone tipped cylinder; Kit comprises Plunger (15g); 2 cone-tipped cylinders (15g and 35g) Typical samples: toothpaste; soft pastes; printing inks

Penetrator Kit No 7

 

Penetrator Kit No 7

Part Number 18107-0 Method: AOSC Standard Cc 16-60; Kit comprises Plunger (47.5g); AOSC 20° aluminium cone (45g) Typical samples: Confectionery; edible fats (butter, margarine); solid emulsions

Penetrator Kit No 8

 

Penetrator Kit No 8

Part Number 18108-0 Method: Unilever; Kit comprises Plunger (47.5g); weight (80g); 40∞ aluminium cone (31.5g) Typical samples: Confectionery; edible fats (butter, margarine); solid emulsions

 

Penetrator Kit No 9

Part Number 18109-0 Method: Tapered Hole Disc; Kit comprises Plunger (15g); 3 weights (5g, 10g and 20g); tapered perforated disc (19.5g) Typical samples: mayonnaise; mustard; semi-liquid fats; rubber solutions

 

Penetrator Kit No 10

Part Number 18110-0 Method: Penetration rod; Kit comprises Plunger (47.5g); penetration rod, 6.3mm dia (6.4g) Typical samples: Silicone rubber

Lazar Scientific is your reliable source for Penetrometers and Grease Workers.