574-271-7020 support@lazarsci.com

Seta Oxi-Cor Bath, 15550-3

A stainless steel water or oil bath with a temperature range of ambient +5°C to 150°C, temperature controlled to ±0.1°C by a top mounted thermostir circulator with integral over-temperature and low fluid level protection devices.

Methods: ASTM D130, ASTM D4048, ASTM D4814, ASTM D525, ASTM D5304, ASTM D7667, ASTM D7671, ASTM D873, BS 2000-112, IP 112, BS 2000-138, IP 138, BS EN ISO 2160, BS 2000-154, ISO 2160, BS EN ISO 7536, BS 2000-40, ISO 7536, DIN EN ISO 2160, DIN EN ISO 7536, IP 154, IP 40, IP 611

The bath has four test stations. Each test station has a lid with a hook for suspending either a copper corrosion test vessel (11500-0) or a test tube support (11420-0). A test tube support can hold up to three test tubes (11590-0). Any combination of copper corrosion vessels and test tube supports may be used.

One or more of the four lids may be replaced by oxidation vessel 15802-2. Pressure in the vessel can be monitored automatically with the Seta Auto-Oxi Control System.

A Silver Corrosion Conversion Kit (11510-0) is available to convert test stations to hold Seta 11430-0 glassware.

Supplied with: 4 lids, mains lead and instruction manual.

  • Ambient +5°C to 150°C temperature range
  • 4 test stations (3 when used for Oxidation tests)
  • Copper/Silver Corrosion and Oxidation tests
  • Optional AUTO-OXI Automatic Pressure Monitoring System (see 15452-0)
Temperature range Ambient +5°C to 150°C
Temperature stability ±0.1°C
Bath capacity 35 litres
Heater Power 1500W
Voltage 110/120V, 50/60Hz 220/240V, 50/60Hz
Size (HxWxD) 41 x 45 x 33cm
Weight 10kg
CCCN Code: Tariff 84198998

Lazar Scientific is your reliable source for Oxidation Stability Testing Equipment.