Setaflash Series 3 ActiveCool Flash Point Tester, 33200-3

The Setaflash Series 3 ActiveCool Small Scale Flash Point Tester is the latest instrument in the Setaflash range. It has been designed to rapidly and efficiently carry out Flash / No Flash tests to determine the flash point of liquids and semi-solids in the 10 to 130°C (50 to 266°F) temperature range.

Methods: ASTM D3278, ASTM D3828, ASTM D7236, ASTM D8174, ASTM E502, BS EN ISO 3679, BS 2000-523, DEF STAN 91-091, EPA 1020 A & B, IP 523, IP 524, IP 534, ISO 3680 (Obs)

Rapid Results in just 1 or 2 Minutes The Setaflash Series 3 Active Cool is an easy to use instrument that can complete a flash/no flash test in less than two minutes and in many cases in 60 seconds, or determine the flash point of a sample within a temperature range of 0°C to 135°C. The sample cup is heated/cooled by Peltier cells. This gives very accurate and stable sub-ambient test temperatures and the benefit of rapid temperature normalization between tests.
Ease of Operation All functions on the Series 3 Active Cool including test parameters, instrument status, and test results are accessed via the touchscreen display and push button. An audible prompt is sounded when a flash is achieved. An automatic flash detector reduces the chance of misinterpretation of the test result by the operator and enhances repeatability.
Innovative Design Gas for the test jet/shutter assembly is supplied from an integral gas tank, which is filled using a standard butane (lighter) refill cartridge. The Series 3 Active Cool Flash Point Tester is lightweight and suitable for mobile use when operated from the optional 12-volt power supply adaptor. Supplied with: 2ml syringe, gas ignitor, mains lead and instruction manual.
  • Flash / No Flash & Ramp Modes
  • 10 to 135°C temperature range
  • Flashpoint test in less than 2 minutes
  • Small sample size – 2 or 4ml
  • Automatic flash detection
  • Automatic barometric correction
  • Electronic Peltier cooling
  • USB port and result storage
  • Colour touch screen
  • Cost-effective
  • Portable operation
  • °C or °F display
  • Simple calibration
Temperature Range 10 to 135°C
Cup Material Aluminium or stainless steel insert
Test Modes Rapid Equilibrium and Ramp
Sample Size 2ml for flash points up to 100°C 4ml for flash points above 100°C
Test Duration 1 minute below 100°C, 2 minutes above 100°C, or user determination 1 to 99 minutes
Ramp Rate 2°C/min ramp
Heating and Cooling System Peltier Cell
Power 200W (maximum)
Voltage 100/240V, 50/60Hz
Gas supply Laboratory gas, 3kPa (0.44psi) maximum pressure or Butane from optional Portable Gas Tank 13667-0
Size (HxWxD) 195 x 295 x 140 mm
Weight 3 kg

Spares and accessories for:
Setaflash Series 3 ActiveCool Flash Point Tester (33200-3)

Optional Accessories

Part Number Description
13666-0 LPG Refill Container (pack of 10)
13747-0 Seta Solid Sample Dispenser
26000-0 Liquid Recovery System
30005-0 Power Supply
30006-0 Carry Case for Setaflash Series 3

Suggested Spares

Part Number Description
13730-005 Silicone Rubber Tube 4 meters
13740-004 Sample Well O-ring, Viton (5)
13740-009 Syringe 2ml (Small Scale Flashpoint instruments)
13740-425 Flash Detector Assembly
13770-311 Syringe 4ml (Small Scale Flashpoint Instruments)
30000-002 Gas Tank

Calibration, Verification, and Training

Part Number Description
13740-017 Heat Sink Compound
30008-0 Thermometer: Precision Plus Digital
99878-3 Small Scale Certified Flash Point Material
99910-2 Portable Digital Barometer
Lazar Scientific is your reliable source for Flash Point Testing Equipment.