Analytical Balance – 99100-2
Rugged electronic balance with wide angle LCD display. The balance is equipped with filters to reduce vibration, and a glass enclosure with sliding doors on three sides for ease of access.
-
-
Auxiliary Blade (Pack of 2) – 11210-2
Stirrer with auxiliary blade.
For use with the Seta Rust Prevention Test Bath (11200-8).
For heavier than water fluids.
-
Beaker 25 ml (Pack of 10) – 11325-0
For use with the Seta Rust Prevention Test Bath (11200-7).
Suitable for ASTM D5534 part B.
-
Chuck Body and Locknut – 11280-0
For use with;
Seta Rust Prevention Test Bath (11200-7)
Grinding and Polishing Rig (11275-4) -
Fuel and Receiver Beaker – 91600-002
600 ml glass beaker, one to be used for sample and one to be used for waste with the Seta Multi Filtration Tester (91600-3). Graduated to 400 ml for the purpose of the test method.
-
Laboratory Drying Oven – 99200-3
A digitally controlled oven suitable for heat storage, heat treatment and drying processes at temperatures up to 300 °C for timed periods up to 999 hours.
The laboratory oven comprises a control panel with an integral high definition TFT-colour display, a 53 litre capacity, heated working chamber, a Pt100 temperature sensor, an ethernet interface, and an over-temperature protection system.
-
NACE Corrosive Properties Kit – 11260-2
NACE kit to meet the requirements of test method NACE TM0172-2015. When used with ASTM D665 apparatus, suitable for measuring the corrosive properties of insoluble petroleum product pipeline cargoes, such as gasoline and distillate fuels
Supplied with;
4 x NACE beakers with symmetric baffles and locating rod
4 x NACE PMMA beaker covers
4 x NACE PMMA specimen holders
4 x PTFE washers -
Pair of Test Specimens – 11330-0
Comprises one each of a vertical and horizontal test specimen with a ground finish, an acrylic holder, and a PTFE washer.
For use with the Seta Rust Prevention Test Bath (11200-7).
Certification: Supplied with Certificate of Conformance.
-
Synthetic Seawater Solution (30 ml Pack of 10) – 11225-0
For use with the Seta Rust Prevention Test Bath (11200-8).
1 year shelf life from manufacture
Certification: Supplied with Certificate of Conformance to ASTM D665.
-
Synthetic Seawater Solution (300 ml) – 11227-0
For use with;
Seta Rust Prevention Test Bath (11200-8)
EMCOR Test Machine (19300-0)
Herschel Emulsifier (96700-2)1 year shelf life from manufacture
Certification: Supplied with Certificate of Conformance to ASTM D665 standard.
-
Syringe 30 ml (Pack of 60) – 11270-0
For use with the Seta Rust Prevention Test Bath (11200-8), in accordance with method NACE TM0172.
-
Thermometer: Precision Plus Digital – 30008-0
The Precision Plus Thermometer is a high accuracy PT100 instrument, ideal for comparison checking the calibration and accuracy of other thermometers and probes, when used in conjunction with a stable temperature heat or chill source.
Supplied with; Handbook, UKAS certificate, silicone boot, carry case, thermometer with hard wired probe, warranty card.
-
Vertical Test Specimen, PTFE Beaker Cover & PTFE Holder (Pack of 5) – 11290-2
Comprises a vertical Test Specimen (11220-001) with a PTFE holder and PTFE beaker cover for testing synthetic oil samples.
For use with the Seta Rust Prevention Test Bath (11200-7).
Certification: Supplied with Certificate of Conformance.