6 Way Window Oxidation Bath and Oxflo Controller, 16960-3

Oil bath and oxygen flow control unit used for quantative analysis of the tendency of oils and fuels to form sludge, acids and deposits when exposed to oxygen in the presence of metallic catalysts over extended periods. The 35 litre oil bath can accept up to six sets of glassware. The stirred oil is maintained to within ±0.1°C at 95°C by an integral thermostir unit that has been designed for continuous use over extended periods, incorporating a stirrer motor well recognized for longevity. The temperature measurement system uses a PT1000 probe to ensure long term temperature stability without routine maintenance or re-calibration.

Methods: ASTM D2274-IP 388, ASTM D4310, ASTM D943, BS 2000 Part 388, IATA Dangerous Goods Regs. Section 3.3.5, IP 157, ISO 4263

The separate Oxflo control unit includes a gas inlet pressure regulator, pressure gauge and six precision flowmeters calibrated for oxygen at 3 litres/hour, 21°C and 0.4 bar pressure. Safety features include low level liquid protection and over temperature cut outs.

  • Temperature range ambient +5 to 120°C
  • 6 position oil bath
  • Reliable digital thermostir unit
  • Seta Oxflo Controller and flowmeters included
  • Low liquid protection
  • Over temperature cut out
Temperature range ambient +5 to 120°C
Stability ±0.1°C
Bath capacity 35 litres
Voltage 110/120V, 50/60Hz or 220/240V, 50/60Hz
Size (HxWxD) Bath: 44 x 35 x 26cm, Oxflo Control Unit: 64 x 36 x 33cm
Weight Bath: 15kg, Oxflo Control Unit: 11kg
CCCN Code: Tariff 90318080

Lazar Scientific is your reliable source for Oxidation Stability Testing Equipment.