
Seta Cu-Ag Corrosion Bath – 11300-2
The Seta Copper / Silver Corrosion Bath is a stainless steel water or oil bath, which is digitally controlled to ±0.1 °C over a temperature range of ambient +5 °C to 120 °C.
Methods: ASTM D130, ASTM D4048, ASTM D4814, ASTM D7667, ASTM D7671, IP 112, IP 154, IP 611, BS 2000-112 & IP 112, BS EN ISO 2160 & BS 2000-154 & ISO 2160, BS EN ISO 6251 & BS 2000-411 & ISO 6251, DIN EN ISO 2160
Features
- Copper/Silver corrosion tests
- Two test stations
- Small footprint
The bath has two test stations, each with a lid and hook for suspending either a Corrosion Pressure Vessel (11500-0) or a test tube Support Assembly (11420-0). The test tube support can hold up to three Test Tubes (11590-0). Any combination of corrosion vessels and test tube supports may be used.
The top-mounted thermostir unit incorporates a low fluid level protection device.
Supplied with: Two lids, mains lead, instruction manual.
TEMPERATURE RANGE | Ambient +5 °C to 120 °C |
---|---|
TEMPERATURE STABILITY | ±0.1 °C |
BATH FLUID | Water or oil |
BATH CAPACITY | 18 Litres |
HEATER POWER | 1200 W |
WATER INLET NOZZLE | 10 mm |
OVERFLOW DRAIN | 10 mm |
VOLTAGE | 110/120 V, 50/60 Hz or 220/240 V, 50/60 Hz |
SIZE (HXWXD) | 52 x 34 x 23 cm |
WEIGHT | 9 kg |
CCCN CODE | Tariff 84198998 |
Accessories, Spares, Calibration, and Training
-
Bath Oil 80 – 120 °C (20 liters) – 94635-0
-
Bath Oil 40 – 85 °C (20 liters) – 94633-0
-
Water Purifier – 15650-0
-
Pressure Vessel – 11500-0
-
Thin Silver Strip Corrosion Kit – 11516-0
-
Copper Corrosion Kit for Grease – 11519-0
-
Copper Corrosion Kit for Diesel, Fuel Oil and Lubricants – 11518-0
-
Copper Corrosion Kit for Gasoline and Jet Fuel – 11517-0
-
Silver Corrosion Test Kit for Gasoline – 11515-0
-
O-Ring Seal (Pack of 30) – 11500-001
-
Cartridge – 15650-001