Seta Oxi-Cor Bath – 15550-3

The Seta Oxi-Cor bath is a stainless steel water or oil bath. Temperature controlled by a top-mounted thermostir circulator with integral over-temperature and low fluid level protection devices.

The bath has four test stations. Each has a lid with a hook, from which you suspend either a Corrosion Pressure Vessel (11500-0) or a test tube Support Assembly (11420-0), holding up to three Test Tubes (11590-0). You can use any combination of these.

NOTE: For oxidation tests, methods specify a certain bath volume per pressure vessel. In order to comply with this, you can only use two oxidation pressure vessels in the bath at the same time.

Methods: ASTM D130, ASTM D525, ASTM D873, ASTM D4048, ASTM D4814, ASTM D5304, ASTM D7667, ASTM D7671, IP 40, IP 154, IP 227 (OBS), IP 611, BS 2000-112 & IP 112, BS 2000-138 & IP 138, BS EN ISO 2160 & BS 2000-154 & ISO 2160, BS EN ISO 7536 & BS 2000-40 & ISO 7536, DIN EN ISO 2160, DIN EN ISO 7536

Download Brochure

Request a Quote

You can replace one or more of the four lids with an Oxidation Vessel (15802-2). Pressure in the vessel can be monitored automatically with the Seta Auto-Oxi Control System (15452-2).

A Silver Corrosion Conversion Kit (11510-0) is available to convert test stations to hold Glassware – Silver Corrosion (11430-0).

Supplied with; 4 lids, mains lead, and instruction manual.

TEMPERATURE RANGE	Ambient +5 °C to 150 °C
TEMPERATURE STABILITY	±0.1 °C
BATH CAPACITY	34 liters
HEATER POWER	1500 W
VOLTAGE	110/120 V, 50/60 Hz 220/240 V, 50/60 Hz
SIZE (HXWXD)	520 × 485 × 330 mm
WEIGHT	10 kg
CCCN CODE	Tariff 84198998