Seta Semi-Automatic Tag Flash Point Tester – 13220-2
The instrument consists of a stainless steel case in which is mounted an electrical heater to heat a test cup, liquid bath and the lid and shutter assembly. The lid and shutter assembly has a test flame size bead (4 mm diameter) mounted on it.
A mains gas inlet block is provided at the rear of the upper section of the instrument case. It comprises a 10 mm diameter hose nozzle and a pinch valve for gas flow control from a mains supply.
A controller has the facility to allow the user to vary the rise rate of the temperature.
Methods: ASTM D56, ASTM D3934, ASTM E502, BS 3900-A8 & BS 6664-1 & ISO 1516, BS 3900-A9 & BS 6664-2 & ISO 1523
- Ambient to 93 °C
- Variable temperature rise rate
- 500 ml Bath
- Bath Capacity: 500ml approx
- Bath Fluid: Water or Silicone Fluid
The test flame uses either mains gas or can operate from the optional Portable Gas Tank (13667-0). The case is manufactured from stainless steel, with an integral drip tray and bath overflow.
|CUP TYPE||Closed Cup|
|TEMPERATURE RANGE||Ambient to 93 °C|
|RAMP RATE||Variable, manually controlled|
|BATH FLUID||500 ml Water or Silicone Fluid|
|POWER||500 W maximum|
|VOLTAGE||110/120 V, 50/60 Hz 220/240 V, 50/60 Hz|
|SIZE (HXWXD)||33 x 31 x 29 cm|
|CCCN CODE||Tariff 90268020|
Accessories, Spares, Calibration, and Training
Silicone Rubber Tube 4 meters – 13730-005
LPG Refill Container (pack of 10) – 13666-0
FLASHCHECK (pack of 3 x 80 ml) – 99880-0
Portable Gas Tank – 13667-0
Thermometer similar to ASTM9C: Gallium with Works Certificate – ASTMST9C
Thermometer: Ferrule and Adaptor (Pack of 2) – 13470-0
Thermometer similar to ASTM57C: Low Haz with Works Certificate – ASTMST57C
Brass Test Cup – 13220-002