Silver and Copper Corrosion Bath – 11400-7

The bath is a stainless steel water or oil bath, digitally controlled to ±0.1 °C over a temperature range of ambient +5 °C to 150 °C, used to determine the corrosive effects of fuels, lubricants, and other hydrocarbon products on copper and silver.

The bath has nine test stations, each with a lid and hook for suspending either a Corrosion Pressure Vessel (11500-0) or a test tube Support Assembly (11420-0). The test tube support can hold up to three Test Tubes (11590-0). You can use any combination of copper corrosion vessels and test tube supports.

Methods: ASTM D130, ASTM D4048, ASTM D4814, ASTM D7667, ASTM D7671, IP 154, IP 611, BS 2000-112 & IP 112, BS EN ISO 2160 & BS 2000-154 & ISO 2160

Features

  • Maximum capacity of 27 tubes
  • programmable digital temperature controller
  • Thermometer port
  • Digital timer
  • Digital setting and control of temperature
  • Accommodates both copper and silver tests
  • Water or oil-filled
  • Overtemperature cut-out and level switch

The top-mounted thermostir unit incorporates over-temperature and low-level protection devices.

A Silver Corrosion Kit (11510-0) is available to convert six of the test stations to hold the Glassware silver Corrosion (11430-0) required for silver corrosion tests.

Supplied with: 9 x lids, mains lead, instruction manual.

TEMPERATURE RANGE Ambient +5 °C to 150 °C
TEMPERATURE STABILITY ±0.1 °C
BATH FLUID Water or Oils
BATH CAPACITY 34 Liters
HEATER POWER 1500 W
WATER INLET NOZZLE 10 mm
OVERFLOW DRAIN 10 mm
VOLTAGE 110/120 V, 60 Hz or 220/240 V, 50 Hz
SIZE (HXWXD) 52 x 45 x 33 cm
WEIGHT 10 kg
CCCN CODE Tariff 84198998
Lazar Scientific is your reliable source for Corrosion Testing Equipment.