Seta TOST Bath – 16640-2

The Seta TOST Bath is a compact solid block bath which can accept up to 12 sets of oxidation glassware and is suitable for TOST tests and as an alternative to liquid filled baths.

Methods: ASTM D943, IP 157, (*ALTERNATIVE TO ASTM D2274-IP 388), ISO 4263, ISO 12205


  • 12 positions
  • Dry block bath
  • Ambient to 100 °C temperature range
  • Integral Setatemp controller
  • Seta Oxflo Controller and flowmeters included

The solid block bath can accept up to 12 sets of oxidation glassware. The layout of the heating elements gives an even temperature distribution and the integral Setatemp 50K Temperature Controller ensures stability over extended test times. Safety features include over-temperature cut-out.

The Seta Oxflo Controller (supplied) comprises an inlet pressure regulator, pressure gauge and six precision flowmeters with tubes and floats calibrated for oxygen at 3 liters/hour, 21 °C and 0.4 bar pressure.

Supplied with:
6 place Seta Oxflo Controller with gas inlet pressure regulation
Pressure gauge
Six precision flowmeters calibrated at 3 liters/hr

Note: For 12 way operation an additional Seta Oxflo Controller (16905-3) is required.

Note: ASTM D2274 specifies the use of a liquid bath.

TEMPERATURE CONTROL AT 95 °C Uniformity: ±0.1 °C Stability ±0.03 °C
BATH TYPE Solid Block
VOLTAGE 220/240 V, 50/60 Hz
SIZE (HXWXD) Bath: 50 x 25 x 64 cm Oxflo Control Unit: 44 x 35 x 26 cm
WEIGHT Bath: 110 kg Oxflo Control Unit: 11 kg
CCCN CODE Tariff 90318080