Setaflash Series 3e ActiveCool Flash Point Tester – Corrosion Resistant Cup – 33270-0
Setaflash Series 3e ActiveCool provides fast and reliable flash point results and requires minimum operator expertise. It has been designed to rapidly and efficiently carry out Flash / No Flash tests to determine the flash point of liquids and semi-solids in the 10 to 135 °C temperature range.
• Product quality
• 2 ml of sample and a result in less than 2 minutes
Designed for precise and accurate tests, barometric pressure is measured by an internal barometer and correction is automatically applied to the test result. Unknown samples can be tested using ramp mode.
Setaflash Series 3 ActiveCool has a very simple user interface with color digital display and touch screen icons which guide the operator through a straightforward testing process. For easy record keeping the instrument stores test results which can be saved and transferred via a USB port.
The versatile range of Setaflash instruments is ideal for use in the laboratory, production line or for portable test applications.
Methods: ASTM D3278, ASTM D3828, ASTM D7236, ASTM D8174, ASTM E502, IP 523, IP 524 (OBS), IP 534, BS EN ISO 3679 & BS 2000-523, ISO 3680 (OBS)
- Flash / No Flash & Ramp modes
- Electric ignitor
- 10 to 135°C temperature range
- Flash point test in less than 2 minutes
- Small sample size (2 or 4ml)
- Automatic flash detection
- Electronic peltier cooling
- Inbuilt touch screen
- Inbuilt USB port
- Portable operation
- °C or °F display
Rapid Results in just 1 or 2 Minutes
The Setaflash Series 3 ActiveCool is an easy to use instrument that can complete a flash/no flash test in less than two minutes and in many cases in 60 seconds, or determine the flash point of a sample within a temperature range of 0 °C to 135 °C. The sample cup is heated / cooled by peltier cells. This gives very accurate and stable sub-ambient test temperatures and the benefit of rapid temperature normalisation between tests.
Ease of Operation
All functions on the Series 3 ActiveCool including test parameters, instrument status and test results are accessed via the touch screen display and push button. An audible prompt is sounded when a flash is achieved. An automatic flash detector reduces the chance of misinterpretation of the test result by the operator and enhances repeatability.
The Series 3 ActiveCool Flash Point Tester is lightweight and suitable for mobile use when operated from the optional 12 volt power supply adaptor.
|TEMPERATURE RANGE||10 to 135 °C|
|SAMPLE CUP MATERIAL||Stainless steel|
|TEST MODE||Rapid Equilibrium and Ramp|
|SAMPLE SIZE||2 ml for flash points up to 100 °C 4 ml for flash points above 100 °C|
|TEST DURATION||1 minute below 100 °C, 2 minutes above 100 °C, or user determined 1 to 99 minutes|
|RAMP RATE||2 °C/min ramp|
|HEATING AND COOLING SYSTEM||Peltier cell|
|POWER||200 W (maximum)|
|VOLTAGE||100/240 V. 50/60 Hz|
|SIZE (HXWXD)||195 x 295 x 140 mm|
Accessories, Spares, Calibration and Training
Heat Sink Compound – 13740-017
Seta Solid Sample Dispenser – 13747-0
Syringe 4 ml (Small Scale Flash Point Instruments) – 13770-311
Syringe 2 ml (Small Scale Flash Point Instruments) – 13740-009
Small Scale Certified Flash Point Material (50 ml) – 99878-3
High Temperature Ignitor for Series 8 and Series 3 – 82000-202
Sample Well O-ring, Viton (pack of 5) – 82150-001
Power Supply – 30005-0
Carry Case – 30006-0
Flash Detector Assembly – 13740-425
Pelican™ Storm Case™ for the Setaflash Series 3 Flash Point Tester
Reference Thermometer – 51000-0-LSI
Lazar Scientific is your reliable source for Flash Point Testing Equipment.