SSAFPAK Aviation Fuel Contamination Test Kit – 86500-3
The SSAFPAK Aviation Fuel Contamination Test Kit is a self-contained kit of test equipment for the rapid detection of contamination in jet aviation fuel. Designed for use on the apron and at fuel storage facilities, SSAFPAK allows you to carry out six tests that can quickly provide a go/no-go decision on aviation fuel quality.
The Kit comprises of 6 key tests: Flash Point, Contamination, Density, Conductivity, Water Content & Microbial Activity.
Methods: ASTM D2624, ASTM D3828, ASTM D7777
- Rapid go/no go testing
- Self-contained and fully portable
- Ready to use
- Six simple to use tests
- Laboratory quality flash point tester
- Rugged fitted case
Flash Point (ASTM D3828):
A Setaflash Series 3 Closed Cup Flash Point Tester provides either a go/no-go test or can determine the actual flash point of the sample. The Setaflash is a laboratory standard instrument featuring an automatic flash detection system that provides a result in two minutes. A power inverter is included to allow operation from a 12V DC supply.
A Seta Detector Module, designed to fit into the cup of the Setaflash Series 3 Closed Cup Flash Point Tester, provides an indication of contamination of gasoline by kerosine or kerosine by diesel fuel by comparing residues after evaporation.
A digital meter is provided to measure the density of the sample.
Conductivity (ASTM D2624):
A digital meter (99708-0) measures the conductivity of the sample, verifying that it remains within specification after the addition of a static dissipator.
Shell Water Detection Capsules indicate the presence of finely dispersed undissolved water in aviation fuel by a simple color change, providing a rapid go/no-go result. A 5 ml sample is drawn through the capsule, and the intensity of the color change gives an approximate indication of the level of contamination, with 30 ppm water easily detectable.
Simple to use test paddles provide a go/no-go test for Hormoconis Resinae (HR) in the sample. Each paddle has two test pads, the low test has a cut-off at 150 µg/l and the high test has a cut-off >750 µg/l HR in fuel.
|SIZE (HXWXD)||350 mm x 900 mm x 800 mm|
|CCCN CODE||Tariff 90269000|
Accessories, Spares, Calibration, and Training
Syringe 2 ml (Small Scale Flash Point Instruments) – 13740-009
LPG Refill Container (pack of 10) – 13666-0
Gas Tank – 30000-206
Sample Well O-ring, Viton (Pack of 5) – 13740-004
Pipettes (5 pairs) – 19700-001
Beaker (pack of 3) – 86500-004
Consumables (gloves, tissues and pad) – 86500-003
Microbial Test Kit (8 tests) – 86500-002
Shell Capsules (pack of 160) – 86500-001
Syringes (pack of 5) – 86500-007