The WLAN Adapter and App for process refractometers allow you to work without an extra display and cabling. Your smartphone is all you need. With the App, you can read the measurements in RI, BRIX, or in your customized scales. With a convenient sharing function, you can forward all measured data to your desktop.
With the Schmidt + Haensch W-LAN Adapter and App, you have access to your process refractometer from anywhere in your factory making it ideal for refractometers installed in hard-to-reach or dangerous areas.
You can now access your data with your smartphone and forward it to your desktop or easily share important performance information such as cleanliness and humidity in the device with your maintenance staff. You no longer need an extra display or cabling.
At the same time, the instrument can communicate your production control via the trusted analog and serial interfaces or without cable via your factory W-LAN.
|Processor||32bit / 580MHz|
|RAM / Flash||8MB / 2MB|
|Ethernet||8 pin RJ45 / 10 /100 Mbps|
|Network Protocol||IP, TCP, UDP, DHCP, DNS, HTTP, ARP, ICMP, Web socket, Httpd client|
|WiFi Standard 802.11 b/g/n||802.11 b/g/n|
|Network Mode||AP / Station / AP+Station|
|Access Terminal Quantity in AP Mode||32|
|Wireless Network Security||WEP: 64-bit/128-bit data encryption / WPA, WPA2, 802.11i: advanced mode and PSK mode encryption: 128-bit TKIP, AES, TKIP/AES|
|Serial Ports||1 (RS-232)|
|Serial Interface||RS-232: DB9 pin type|
|Serial Data Bits / Stop Bits / Check Bit||5, 6, 7, 8 / 1, 2 / None, Even, Odd, Space, Mark|
|Serial Baud Rate||300 bps – 460800 bps|
|Configuration||Built-in webpage, Serial AT command Computer set-up software|
|Operating Temperature||-10 ~ 80°C|
|Size / Weight||160 x 90 x 35 mm / 232g|