Analytical Balance – 99100-2
Rugged electronic balance with wide angle LCD display. The balance is equipped with filters to reduce vibration, and a glass enclosure with sliding doors on three sides for ease of access.
-
-
ASTM D943 & D4310 Accessory Pack – 16950-0
Supplied with;
1 x Thermometer bracket (not shown in image)
2 x Support rings
6 x Sampling tube holders
6 x Sampling tube spacers
6 x Stainless steel sampling tubes with Luer connector (one shown in image)
6 x Stoppers
6 x Oil level indicator strips (not shown in image)
6 x 10 ml syringes -
Hot Plate – 25000-4
The Hot Plate is a compact, bench-top heat source designed for laboratory procedures that require precise temperature control.
The hot plate features a ceramic hot plate, which can be accurately controlled to temperatures from 30-540 °C. The hot plate temperature is set via a control dial and the digital display allows you to monitor the temperature of the heating surface.
-
Laboratory Drying Oven – 99200-3
A digitally controlled oven suitable for heat storage, heat treatment and drying processes at temperatures up to 300 °C for timed periods up to 999 hours.
The laboratory oven comprises a control panel with an integral high definition TFT-colour display, a 53 litre capacity, heated working chamber, a Pt100 temperature sensor, an ethernet interface, and an over-temperature protection system.
-
Pre-Formed Copper and Steel Catalyst Coil (pack of 6) – 16921-0
Pre-formed coils are supplied with a Material Certificate stating conformance to the relevant specification.
-
Sample Filtering Kit for ASTM D2274 – 16914-0
Comprise:
– Filters
– Filter holder
– Vacuum flask
– Forceps
– Desiccator
– 0.8 micron 47 mm filters x 100
– Vacuum pump
– 250 ml beaker (graduated to 200 ml)
– Silicone tube -
Set Glassware ASTM D2274, D7462, ISO 12205, IP 388 (6 cells) – 16910-0
Comprises six each condensers, test tubes, delivery tubes and interconnecting tubing.
-
Set Glassware ASTM D943, ASTM D4310, ISO 4263, IP 157 (6 cells) – 16911-0
Glassware to conform to ASTM D943 and D4310 test methods. Comprises 6 x glass condenser, test tubes, delivery tubes and interconnecting tubing.
-
Silicon Carbide Paper P100 FEPA Grade (Pack of 50) – 11470-0
For use with Stanhope-Seta Corrosion, TOST, Robot and Oxi-Cor baths.
-
Viscometer Bath Oil 80 – 120 °C (20 litres) – 94635-0
20 Litres of bath oil, for filling viscometer baths in the temperature range of 80 to 120 °C. Seta bath fluids are formulated to maximise the heat stability and efficiency of Seta baths. The low viscosity reduces formation and aids dissipation of bubbles.