Setaflash Series 3e Flash Point Tester – 30020-0
The Setaflash Series 3e closed cup flash point tester is a compact, bench top/portable instrument used to carry out ‘flash/no flash’ tests and determine flash point temperatures.
The Series 3e can perform tests at temperatures ranging from 0 to 300 °C (with the 13870-0 Seta Cooling Module allowing temperatures below ambient).
Operated by a touchscreen, icons guide you through the simple test procedure, with a test taking less than 2 minutes with just 2 or 4 ml of sample required. Up to 10,000 test results can be saved in the instrument’s internal memory, which can be saved and transferred via a USB port for data analysis.
Methods: ASTM D3278, ASTM D3828, ASTM D7236, ASTM D8174, IP 523, IP 524, IP 534, CLP REGULATIONS EC NO 1272/2008, EPA 1020 B, ISO 3679, ISO 3680 (OBS)
Features
- Electric ignition
- Ambient to 300 °C
- Small sample size
- Under 2 minute test
- Simple operation
- Compact, rugged, portable design
- Suitable for unknown samples using ramp mode
- Automated flash detection
- Automatic barometric pressure correction
- Color touchscreen
- USB port and result storage
Ease of use:
All functions on the Series 3, including test parameters, instrument status, and test results, are accessed via the touchscreen display and push button. An audible prompt sounds when a flash is achieved, and an automatic flash detector enhances repeatability.
Calibration and verification:
Calibration of the Series 3 can be performed in the field, eliminating the costs and time associated with sending the instrument to a service center.
Service and maintenance:
The rugged design ensures minimal operational maintenance in needed.
Supplied with: 2 ml syringe, ignitor, Allen key, mains lead, quick start guide, and instruction manual
TEMPERATURE RANGE | Ambient to 300 °C |
---|---|
TEMPERATURE RAMP MODE | Automatic or custom settings (ramp rate: up to 6 °C/min and beep rate: up to 5 °C/B intervals) Extended test range, 100 °C from start temperature |
TEMPERATURE SELECTION | °C or °F |
USER INTERFACE | Color LCD display – touch screen sensitive |
NAVIGATION | Control knob (rotational and push-down) |
DATA STORAGE | 1GB (internal memory and integrated USB port) |
SAMPLE SIZE | 2 ml or 4 ml |
PRESSURE CORRECTION | Automatic pressure correction |
VOLTAGE | 110 to 250 V a.c~50/60 Hz (universal) |
POWER | 200 W (Max.) |
SIZE (HXWXD) | 19.5 cm x 29.5 cm x 14 cm |
WEIGHT | 3 kg |
CCCN CODE | Tariff 90268020 |
Accessories, Spares, Calibration, and Training
-
Heat Sink Compound – 13740-017
-
Seta Solid Sample Dispenser – 13747-0
-
Syringe 4 ml (Small Scale Flash Point Instruments) – 13770-311
-
Syringe 2 ml (Small Scale Flash Point Instruments) – 13740-009
-
Small Scale Certified Flash Point Material (50 ml) – 99878-3
-
High Temperature Ignitor for Series 8 and Series 3 – 82000-202
-
Sample Well O-ring, Viton (pack of 5) – 82150-001
-
Power Supply – 30005-0
-
Carry Case – 30006-0
-
Flash Detector Assembly – 13740-425
-
Portable Digital Barometer – 99910-2
-
Pelican™ Storm Case™ for the Setaflash Series 3 Flash Point Tester