Disposable Pipettes – Pack of 500 – 700116-01
Easily transfer liquid samples into sample cups.
Showing 177–192 of 641 results
-
-
Distillation 500 ml Flask Heater (for up to 3 flasks) – 24530-4
The Seta Distillation Flask Heater is a regulated heating mantel which has the capacity to accommodate up to three 500 ml flasks (glassware sold separately). It is a general purpose heating mantel designed for laboratory procedures that require precise temperature control.
Each heating element is made of glass fibre which minimises damage to the flask in case of a slight impact between flask and heater. Heating efficiency is promoted greatly with good contact between the heating element and the glass vessel.
Temperature is adjusted by a temperature control dial. A heater power indicator will illuminate when power is applied to the heater element. Once a stable temperature is achieved, the indicator will flash as it applies bursts of power to maintain the temperature.
-
Distillation 500 ml Flask Heater – 24410-5
The Seta Distillation Flask Heater is a regulated heating mantel which has the capacity to accommodate a 500 ml flask. It is a general purpose heating mantel designed for laboratory procedures that require precise temperature control.
The heating element is made of glass fibre which minimises damage to the flask in case of a slight impact between flask and heater. Heating efficiency is promoted greatly with good contact between the heating element and the glass vessel.
Temperature is adjusted by a temperature control dial. A heater power indicator will illuminate when power is applied to the heater element. Once a stable temperature is achieved, the indicator will flash as it applies bursts of power to maintain the temperature.
Note; clamp, bosshead and glassware available separately.
Supplied with: Support rod, mains lead and user manual.
-
Distillation Flask 125 ml NS type (Pack of 5) – 11940-0
For use with the Setastill Distillation (11860-3).
-
Drain Tubing – 200037-01
Drain tubing is used for Accu-flow sampling, and as a safety measure for sample leaks. Sold in 6′ increments. Used with Clora, Maxine, and Phoebe benchtop analyzers – see details tab for more information.
-
-
Dry Well Probe Calibrator – 60005-002
A portable instrument designed to provide quick and accurate calibration of thermocouple and RTD temperature probes.
The probe calibrator is managed by a temperature controller system, incorporating a heater and a precision sensor housed in the aluminium block. You can set the temperature in 0.1 °C increments. The current temperature of the block and the set temperature display on the LCD screen.
Supplied with: mains lead, instruction manual and calibration certificate (traceable calibration).
-
Drying Tower for ASTM D892 – 14015-2
The drying tower is a moulded-acrylic column with a water-vapour capacity of 50 g, height is 300 mm. It is safe for working pressures up to 90 psig and can regenerate by heating granules on a tray for one hour at 200 °C.
For use with the SetaFoam Dual Twin Foam Test Baths (14020-8).
-
Dual Glass Flowmeter – 14011-2
Comprises a right hand bracket and two flowmeters.
For use with the SetaFoam Dual Twin Foam Test Baths (14020-8).
-
-
Electric Ignitor Assembly – 35300-003
Electric Ignitor Assembly for use with Seta C-92 Automatic Cleveland Flash Point Tester (35300-0)
-
Emergency Stop – 35002-002
Emergency Stop for use with the SafeFlash Fire Extinguisher System (35002-0), Herschel Emulsifier (96700-2) and Grinding and Polishing Rig (11275-4).
-
EN 1426 Kit – 18580-0
Supplied with;
3 x needles
10 x bitumen containers
1 x transfer dish -
Erlenmeyer Flask 1 Litre – 21300-002
1 litre Erlenmeyer flask for use with the Seta Extraction Apparatus (21300-0).
-
Etnom® Accucells – Bag of 100 – 490002-02
Accucells provide easy and hassle-free sample preparation. Used with Clora benchtop analyzers – see details tab for more information.
Etnom® is a registered trademark of Chemplex Industries, Inc. -
Etnom® Sample Film – Box of 100 – 200335-02
Film Thickness: 3um
Thin film can be used with sample cups as a sample support window. Simply attach a thin film to one end of a new sample cup. Used with Clora benchtop analyzers – see details tab for more information.
Etnom® is a registered trademark of Chemplex Industries, Inc.