Showing 193–208 of 641 results
Used to reduce the air pressure within an external air line from a maximum of 20 bar gauge to 1.4 bar gauge (20 psi gauge) before it enters the instrument.
For use with the Air Release Value System (15840-0).
Equipped with 1/4 ” BSP hose tails on input / output.
Inlet fan filter for Sindie, Clora, Maxine, and Phoebe benchtop analyzers – see details tab for more information.
Annual service kit for ASTM D7963 for use with ttheSeta FIJI Analysers (FAME in Distillate and Residual Fuels SA5100-0, FAME in MultiFuels SA5200-0).
Supplied with;
External tubing
External fittings
Seals
1 x 100 ml 30 mg/kg verification material
1 x 100 ml 100 mg/kg verification material
1 x 100 ml 400 mg/kg verification material
1 x 100 ml 900 mg/kg verification material
Please note the verification material has a shelf life of 2 years from date of manufacture.
Produced in general accordance with the principles of ISO 17034 and ISO 33405, the FIJI Calibration Material Set is a set of nine hydrocarbon samples containing a known concentration of FAME with certified values. They have been produced by accurately determining the mass of ingredients using a balance certified by an ISO 17025 accredited laboratory.
Pack size: 100 mL.
FIJI ASTM D7963 Cartridges (pack of 100) – SA5105-100
Methods
ASTM D7963
Pack of 100 ASTM D7963 cartridges for use with the FIJI DRG – FAME in Distillate & Residual Fuels (SA5100-0) and FIJI MF – FAME in MultiFuels (SA5200-0).
The FIJI control system pumps the sample to the FTIR either directly or via the Sorbent Cartridge. If routed for conditioning, the sample will pass through the Sorbent Cartridge where any FAME in the sample is stripped out. A filter prevents any sorbent particles being drawn into the system.
Supplied with;
100 x sorbent cartridges
200 x 5µm filters
1 cartridge and 2 filters are required for each test.
Start up kit for use with the Seta FIJI Analysers (FAME in Distillate and Residual Fuels SA5100-0 and FAME in MultiFuels SA5200-0) to perform ASTM D7963 tests.
Supplied with;
1 x box of low lint wipes
11 x 50 ml sample/waste beakers
10 x SA5105 sorbent cartridges and 5µm filters
10 x inlet filters
1 x 100 ml 30 mg/kg verification material
1 x 100 ml 100 mg/kg verification material
1 x 100 ml 400 mg/kg verification material
1 x 100 ml 900 mg/kg verification material
Please note that the verification material has a shelf life of 2 years from date of manufacture.
Pack of 100 x 50 ml beakers for use with the FIJI JF – FAME in Jet Instrument (SA5000-2), FIJI DRG – FAME in Distillate & Residual Fuels (SA5100-0) and FIJI MF – FAME in MultiFuels (SA5200-0).
1 beaker to be used per test, beakers can be reused but must be cleaned and dried before each test.
The FIJI DRG Range Extender is a Hydrocarbon diluent that comes in several sizes that meets your laboratory needs. The diluent should be used when samples are expected to contain >1000 mg/kg of FAME, or when the sample is a residual fuel.
This diluent conforms to the requirements laid out in ASTM D7963.
Annual service kit for use the Seta FIJI FAME in Jet SA5000-2 to perform ASTM D7797 and IP 583 tests.
Supplied with;
External tubing
External fittings
Seal
1 x 100 ml 30 mg/kg verification material
1 x 100 ml 100 mg/kg verification material
Please note the verification material has a shelf life of 2 years from date of manufacture.
Produced in general accordance with the principles of ISO 17034 and ISO 33405, the FIJI Calibration Material Set is a set of five hydrocarbon samples containing a known concentration of FAME with certified values. They have been produced by accurately determining the mass of ingredients using a balance certified by an ISO 17025 accredited laboratory.
Pack size: 100 mL.
Pack of 100 IP 583 and ASTM D7797 cartridges for use with the FIJI JF – FAME in Jet Instrument (SA5000-2) and FIJI MF – FAME in MultiFuels (SA5200-0).
The FIJI control system pumps the sample to the FTIR either directly or via the Sorbent Cartridge. If routed for conditioning, the sample will pass through the Sorbent Cartridge where any FAME in the sample is stripped out. A filter prevents any sorbent particles being drawn into the system.
Supplied with;
100 x sorbent cartridges
100 x 5µm filters
1 cartridge and 1 filter are required for each test.
Pack of 100 IP 583 and ASTM D7797 cartridges for use with the FIJI JF – FAME in Jet Instrument (SA5000-2) and FIJI MF – FAME in MultiFuels (SA5200-0).
The FIJI control system pumps the sample to the FTIR either directly or via the Sorbent Cartridge. If routed for conditioning, the sample will pass through the Sorbent Cartridge where any FAME in the sample is stripped out. A filter prevents any sorbent particles being drawn into the system.
Supplied with;
100 x sorbent cartridges
100 x 5µm filters
1 cartridge and 1 filter are required for each test.
Start up kit for use with the Seta FIJI FAME in Jet SA5000-2 to perform ASTM D7797 and IP 583 tests.
Supplied with;
1 x box of low lint wipes
11 x 50 ml sample/waste beakers
10 x SA5005 sorbent cartridges 5µm filters
1 x 100 ml 30 mg/kg verification material
1 x 100 ml 100 mg/kg verification material
Please note that the verification material has a shelf life of 2 years from date of manufacture.
Pack of 280 low lint wipes for use with the FIJI JF – FAME in Jet Instrument (SA5000-2), FIJI DRG – FAME in Distillate & Residual Fuels (SA5100-0) and FIJI MF – FAME in MultiFuels (SA5200-0).
Produced in general accordance with the principles of ISO 17034 and ISO 33405, the FIJI Verification Material is a hydrocarbon containing a known concentration of FAME with a certified value. It has been produced by accurately determining the mass of ingredients using a balance certified by an ISO 17025 accredited laboratory.
Supplied with full documentation including Safety Data Sheet (SDS), in tamper evident security package, it comes with a 2 year shelf life from date of manufacture.
Produced in general accordance with the principles of of ISO 17034 and ISO 33405, the FIJI Verification Material is a hydrocarbon containing a known concentration of FAME with a certified value. It has been produced by accurately determining the mass of ingredients using a balance certified by an ISO 17025 accredited laboratory.
Supplied with full documentation including Safety Data Sheet (SDS), in tamper evident security package, it comes with a 2 year shelf life from date of manufacture.
Office:
12692 Sandy Drive
Suite 116
Granger, IN 46530