Flat Glass Test Tube (Pack of 10) – 11570-0
Flat glass test tube to protect strip during inspection, for use with;
Seta Copper Corrosion Block Bath (11308-0)
Seta Oxi-Cor Bath (15550-3)
Copper Strip Corrosion Test Vessel (22150-5)
Showing 225–240 of 641 results
-
-
Flow Verification Kit – 97450-0
The Flow Verification Kit is used with the Micro Carbon Residue Tester (MCRT) (97400-3), to enable the user to verify the flow rate of nitrogen during the test stages.
The kit consists of a 150 mm glass scale VA flowmeter on a stand, supplied with a length of plastic tube that when connected to the MCRT in place of the existing mass flow meter will show the actual nitrogen flow rate during the test cycle.
The Flow Verification Kit should only to be used by a Seta trained partner.
The VA flowmeter is supplied with a two point UKAS certificated of calibration for the two specific gas flow rates 160 ml/min and 600 ml/min.
-
Flow-through tube – 09212 & 09213
Tubes with funnel and riser for Polarimeter and Coloromat®
- Flow-through tube with funnel and riser
- Only for Unipol, Polartronic V, Saccharomat models with plug-in connection inside of the sample compartment
Polarimeter tubes of SCHMIDT + HAENSCH are designed for different applications. All tubes meet the ICUMSA recommendations, class A (±0.01%) and the corresponding specifications of the O.I.M.L. and the Australian
Standard K 157 regarding construction and precision. In general: Longer measuring tubes are more reliable than short ones. Sample heterogeneity and residues from previous samples have a larger influence on the accuracy of the
measurement when applying shorter tubes. Larger sample volumes ensure more stability. An exception is the case of
dark samples; a shorter measuring tube might be necessary due to the high absorption of light. -
Flow-through tube thermostatable – 09216 & 09217
Thermostatable flow-through tubewith funnel and riser
Only for Unipol, Polartronic V, Saccharomat models with plug-in connection inside of the sample compartment
Polarimeter tubes of SCHMIDT + HANESCH are designed for different applications. All tubes meet the ICUMSA recommendations, class A (±0.01%) and the corresponding specifications of the O.I.M.L. and the Australian
Standard K 157 regarding construction and precision. In general: Longer measuring tubes are more reliable than short ones. Sample heterogeneity and residues from previous samples have a larger influence on the accuracy of the
measurement when applying shorter tubes. Larger sample volumes ensure more stability. An exception is the case of
dark samples; a shorter measuring tube might be necessary due to the high absorption of light. -
Flow-through tube with integrated temperature sensor – 03820 & 03830
Tubes with funnel and riser for Polarimeter and Coloromat®
Flow-through tubes with funnel and riser are available with integrated:
- Temperature sensor
- Thermostats and additional hose connection for water circulator
- Tube for manual sample changing, not thermostable
- Only for Unipol, Polartronic V and H series, Saccharomat models with plug-in connection inside of the sample compartment
Polarimeter tubes of SCHMIDT + HAENSCH are designed for different applications. All tubes meet the ICUMSA recommendations, class A (±0.01%) and the corresponding specifications of the O.I.M.L. and the Australian Standard K 157 regarding construction and precision. In general: Longer measuring tubes are more reliable than short ones. Sample heterogeneity and residues from previous samples have a larger influence on the accuracy of the measurement when applying shorter tubes. Larger sample volumes ensure more stability. An exception is the case of dark samples; a shorter measuring tube might be necessary due to the high absorption of light.
-
-
Foam Verification Kit – 14028-4
An apparatus to quickly verify the maximum pore diameter and permeability of Mott diffusers (Cylindrical Metal Diffuser and Tube (14023-0)) and Norton stones (Spherical Diffuser and Tube (14021-0)).
For use with the SetaFoam Dual Twin Foam Test Baths (14020-8).
-
-
Fuel and Receiver Beaker – 91600-002
600 ml glass beaker, one to be used for sample and one to be used for waste with the Seta Multi Filtration Tester (91600-3). Graduated to 400 ml for the purpose of the test method.
-
Gas Tank – 30000-206
Gas tank for use with the Setaflash Series 3 and Series 8 Flash Point Tester range.
-
Gaskets (pack 4) – 19400-501
Pack of 4 gaskets for use with the Seta High Temperature Roll Stability Tester (19400-5) for ambient testing.
-
Gauge Adaptor (pack of 2) – 22490-0
1/2 inch BSP male to 1/4 inch BSP female. For fitting gauge to Main Chamber (22300-3), pack of 2.
-
Glass Adaptor – 15840-008
Screw top, air inlet connection.
For use with the Air Release Value System (15840-0).
-
Glass Beaker (pack of 10) – 99700-602
Pack of 10 x 100 ml glass beakers for use with the Salt in Crude Analyser (99700-6).
-
Glass Beaker, CFBT & CSCFBT, 800 ml (pack of 2) – 91670-001
Pack of 2 x 800 ml glass beakers for use with the Cold Filter Blocking Tester (91670-2).
-
Glass Cylinder – 96511-0
100 ml graduated glass cylinder for use with the Seta Herschel Emulsifier (96700-2).