H2S Pipette – SA4004-0
Pipette and tips for use with the H2S Analyser. Pipettes are required if sample concentrations exceed 20 mg/kg (20 ppm).
Showing 257–272 of 641 results
-
-
H2S Start up Kit for IP 570 (approx. 20 tests) – SA4003-4
Start up kit for use with the H2S Analyser (SA4000-4) to perform IP 570 test. Allows approximately 20 tests.
Supplied with;
10 x VPP cartridges
2 x nylon filters
5 x test vessels
500 ml diluent
20 x 10 ml disposal syringes -
H2S Static Calibration and Verification Kit – SA4001-2
H2S Static Calibration and Verification Kit – SA4001-2
H2S static calibration and verification kit for use with the H2S Analyser. Includes traceable verification gas, replacement regulator and a connection hose.
Note: these items allow monthly verification of the sensor.
-
H2S Syringes (pack of 200) – SA4000-007
Pack of 200 x 10 ml syringes for use with the H2S Analyser
-
H2S Vapour Phase Processor Cartridge (pack of 100) – SA4017-100
Pack of 100 filter cartridges for use with the H2S Analyser. One to be used per test.
-
Heat Sink Compound – 13740-017
Heat Sink Compound for the calibration of the Seta PM-93 Pensky Martens Flash Point Tester’s (35000-0) temperature probe.
-
High Level Centrifuge Trolley – 90015-0
High Level Centrifuge Trolley with lockable castors, height is 59 cm alone or 99 cm with the 4 or 6 place Seta Oil Test Centrifuge (90000-3 & 90100-0).
A trolley measuring 28 cm in height is also available
-
High Temperature Ignitor for Series 8 and Series 3 – 82000-202
High Temperature Ignitor for use use with the Series 8 and Series 3 ActiveCool Flash Point Testers.
-
High-Viscosity Etnom Accucells – Bag of 100 – 490016-02
Open-top sample cups for viscous samples and accu-flow. Used with Clora benchtop analyzers – see details tab for more information.
Etnom® is a registered trademark of Chemplex Industries, Inc. -
High-Viscosity Prolene Accucells – Bag of 100 – 490035-01
Open-top sample cups for viscous samples and accu-flow. Used with Maxine benchtop analyzers – see details tab for more information.
-
Holder for Mixed Sample Tubes – 97410-0
Holder for mixed sample tubes, 2 or 4 ml x 6 and 16 ml x 3.
-
Hose Replacement Kit – 15840-002
Comprised of a complete set of required length hoses, with the appropriate quick release fittings.
For use with the Air Release Value System (15840-0).
-
Hot Plate – 25000-4
The Hot Plate is a compact, bench-top heat source designed for laboratory procedures that require precise temperature control.
The hot plate features a ceramic hot plate, which can be accurately controlled to temperatures from 30-540 °C. The hot plate temperature is set via a control dial and the digital display allows you to monitor the temperature of the heating surface.
-
Hussami Kit (Cleveland) – 34301-0
Hussami kit to prevent surface skin formation when testing flash point of asphalts as detailed in ASTM D92 Appendix X1.
Consists of metal tension ring, filter papers and hole punch.
For use with the Seta C-92 Cleveland Flash Point Tester (35300-0)
-
-
IATA Container Sampling Kit – SA1005-0
IATA Container Sampling Kit for use with the AvCount2 (SA1000-2) and AvCount Lite (SA1800-2). Comprises a 51mm bung for wider neck or deeper containers.