Showing 385–400 of 641 results
Bourdon-Tube type pressure gauge with 150 mm diameter mirror band dials to eliminate paralax errors while reading. The graduations are marked in kPa and psi (lbf/in2).
The gauge has a bottom entry 1/4 inch BSP fitting and a heavy duty stainless steel case with a large carrying handle suitable for lifting a complete pressure vessel assembly from a bath.
The gauge conforms to EN837 S2, Accuracy Class 1 ±1% fsd.
Bourdon-Tube type pressure gauge with 150 mm diameter mirror band dials to eliminate paralax errors while reading. The graduations are marked in kPa and psi (lbf/in2).
The gauge has a bottom entry 1/4 inch BSP fitting and a heavy duty stainless steel case with a large carrying handle suitable for lifting a complete pressure vessel assembly from a bath.
The gauge conforms to EN837 S2, Accuracy Class 1 ±1% fsd.
Bourdon-Tube type pressure gauge with 150 mm diameter mirror band dials to eliminate paralax errors while reading. The graduations are marked in kPa and psi (lbf/in2).
The gauge has a bottom entry 1/4 inch BSP fitting and a heavy duty stainless steel case with a large carrying handle suitable for lifting a complete pressure vessel assembly from a bath.
The gauge conforms to EN837 S2, Accuracy Class 1 ±1% fsd.
Bourdon-Tube type pressure gauge with 150 mm diameter mirror band dials to eliminate paralax errors while reading. The graduations are marked in kPa and psi (lbf/in2).
The gauge has a bottom entry 1/4 inch BSP fitting and a heavy duty stainless steel case with a large carrying handle suitable for lifting a complete pressure vessel assembly from a bath.
The gauge conforms to EN837 S2, Accuracy Class 1 ±1% fsd.
Probe and sensor for use with the Salt in Crude Analyser (99700-6).
For use with the Setastill Distillation (11860-3).
4.95 litres / second at 7 bar. Supplied with regulator.
For use with;
Seta Existent Gum Solid Block Bath – Steam or Air (12200-3)
Seta Existent Gum Solid Block Bath – Air (12210-0)
The iCS2 inline refractometer can be quickly and easily connected to a PC using the USB adapter cable. The plug-and-play solution enables immediate communication between the device and software – without any complicated set-up. With the UniConfig software supplied with the iCS2 process refractometer, measurements can be carried out, controlled and conveniently evaluated directly via the computer. The software also allows the process refractometer to be configured individually – according to the requirements of your application. Ideal for running processes or mobile applications where flexibility and efficiency are important.
The ‘SafeFlash’ system automatically and immediately activates an extinguisher in the event of excess flame or fire around the test cup on the Seta PM-93 Pensky Martens Flash Point Tester (35000-0).
If discharged the screen prompts the user to re-activate the extinguisher by simply replacing the integral CO2 canister. The canister will remain sealed inside the instrument until pierced by the actuator mechanism.
Salt in Crude Mixed Salt Solution – 99704-001
Produced in general accordance with the principles of ISO 17034 and ISO 33405, the Salt in Crude Mixed Salt Solution is a volumetric blend of Calcium chloride (CaCl2), Magnesium chloride (MgCl2) and Sodium chloride (NaCl) solutions, produced by accurately measuring the volumes of the solutions in proportions of 10%, 20% and 70% respectively as specified in ASTM D3230.
The Salt in Crude Mixed Salt Solution is supplied with full documentation including Safety Data Sheet (SDS), in tamper evident security packaging. It comes with a 2 year shelf life from date of manufacture.
Pack size: 250 mL.
Produced in general accordance with the principles of ISO 17034 and ISO 33405, the Salt in Crude Refined Neutral Oil is a chloride free, ASTM D3230 refined neutral oil.
The Salt in Crude Refined Neutral Oil is supplied with full documentation including Safety Data Sheet (SDS), in tamper evident security packaging. It comes with a 5 year shelf life from date of manufacture.
Pack size: 250 mL.
A set of 3 ‘SaltCheck’ verification modules supplied in a convenient storage case for use with the Salt in Crude Analyser (99700-6). The modules are calibrated to show equivalent salt values of:
Instrument verification is easy – simply switch the instrument on and place the sensor into each ‘SaltCheck’ module to confirm that the correct reading is being displayed.
Saltcheck is supplied with a certificate of verification.
Folded stainless steel holder with plastic edging for use with AvCount2 (SA1000-2), AvCount Lite (SA1800-2) and AvCount Lube (SA1900-0). Suitable for all 250 ml (63 mm diameter) ‘syrup’ bottles.
Refractometer sample room lids
Additional complete special sample chamber covers for SCHMIDT + HAENSCH ATR P models allow for large sample volumes flow-through with funnel and rinser, connections for water circulation, or flow-through for automatic measurements using a pump.
ID-N° in specifications below
Sample Cup for use with Seta C-92 Automatic Cleveland Flash Point Tester (35300-0)
Office:
12692 Sandy Drive
Suite 116
Granger, IN 46530