Showing 465–480 of 641 results
-
The controller is a plug-in, automated temperature control unit which is powered from the host flash point tester to override the testers’ own controller.
It accurately controls the specified rate of temperature rise in the sample cup and provides an audible prompt at specified temperature intervals for the flash point to be checked.
The unit fits underneath and derives power from the host apparatus and the power controller on the host instrument is disabled by its connection.
For use with;
Seta Pensky-Martens Closed Cup Flash Point Tester (13661-4)
Seta Semi-Automatic Cleveland Open Cup Flash Point Tester (13811-3)
-
Produced in general accordance with the principles of ISO 17034 and ISO 33405, the SetaVap Certified Reference Material (CRM) Pentane provides certified values for multiple test methods and has been characterised using a network of competent laboratories to provide international traceability. It is a highly cost effective solution to help meet verification requirements for audited laboratories and those which comply with ISO 17025.
The SetaVap CRM Pentane is supplied with full documentation including Safety Data Sheet (SDS), in tamper evident security packaging.
Pack size: 200 mL.
Methods
ASTM D5191, ASTM D6378, EN 13016-1, EN 13016-3
-
Pack of 160 shell capsules for use with the SSAFPAK Aviation Fuel Contamination Test Kit (86500-2).
-
Shutter lubricant for use with Seta Flash Point Testers.
-
Seive bracket for the Dual Washout Water Tester 19650-0.
-
Clarcel CBL or Filter Cel
Quiet running compressor by Silver-Line. Whisper quiet/oil lubricated compressor, fully automatic operation with pressure switch and relief valve, internally coated air receiver incl. safety valve, pressure gauge and condensate drain valve. Maintenance unit with oil/water separator and stepless pressure adjustment.
-
Silicon-carbide powder of 105 µm (120 mesh) as defined by the Federation of European Producers of Abrasives (FEPA).
For use with;
Seta Cu-Ag Corrosion Bath (11300-2)
Seta Copper Corrosion Block Bath (11308-0)
Seta Oxi-Cor Bath (15550-3)
Copper Strip Corrosion Test Vessel (22150-5)
Seta Corrosion Test Bath (22220-5)
-
For use with Stanhope-Seta Corrosion, TOST, Robot and Oxi-Cor baths.
-
For use with;
Seta Cu-Ag Corrosion Bath (11300-2)
Seta Copper Corrosion Block Bath (11308-0)
Seta Oxi-Cor Bath (15550-3)
Silver and Copper Corrosion Bath (11400-7)
-
For use with;
Seta Cu-Ag Corrosion Bath (11300-2)
Seta Copper Corrosion Block Bath (11308-0)
Seta Oxi-Cor Bath (15550-3)
Copper Strip Corrosion Test Vessel (22150-5)
Seta Corrosion Test Bath (22220-5)
-
-
Replacement gas tubing for use with Flash Point Testers.
Length: 4 m
-
For use with the Setastill Distillation (11860-3).
-
The silver corrosion kit comprises all the accessories required to carry out tests on gasoline to ASTM D7671 and IP 611 standards. Supplies allow for running two tests simultaneously.
Suitable for Procedure A and B.
-
The silver corrosion kit comprises all the accessories required to carry out tests on gasoline to ASTM D7671 and IP 611 standards. Supplies allow for running two tests simultaneously.
Suitable for Procedure A and B.
-
For use with;
Seta Cu-Ag Corrosion Bath (11300-2)
Seta Copper Silver Block Bath (11310-0)
