Tweezers (pack of 2) – 16220-0
Pack of 2 tweezers with blunt points and slip lock to grip filters.
Showing 593–608 of 641 results
-
-
U-Tube Reverse Flow Viscometer – 1637.1
Suitable for measuring opaque liquids
Complete with UKAS Certificate of Calibration (ISO 17025). Laboratory No.0247
Nominal overall length 275 mm, approximate sample volume 12-25mLViscometer Specifications: ASTM D446, ISO 3105, IP 71 Part 2, BS 188
Test Methods: ASTM D445, ISO 3014, IP 71 Part 1, BS 188Sample Type: Transparent
-
U-Tube Viscometer – 1619.1
- Suitable for measuring transparent liquids
- Complete with UKAS Certificate of Calibration (ISO 17025). Laboratory No. 0247
- Type BS/U – Nominal overall length 300 mm, approximate sample volume 13-40 mL
Specifications: ASTM D446, ISO 3105, IP 71 Part 2, BS 188
Test Methods: ASTM D445, ISO 3014, IP 71 Part 1, BS 188Sample Type: Transparent
-
Ultra Stirrer with Stand – 99224-2
High speed disperser complete with dispersing tool, stand and mounting arm.
The dispersing tool is specifically designed for wet crushing, suspension, emulsifying and disagglomeration in liquids.
Recommended for use with the Crude Oil Filtration Kit for ASTM D4807.
-
Ultrasonic Bath to ISO 11171 – 99320-4
Ultrasonic bath typically for use for the preparation of AvCount calibration and verification materials in accordance with ISO 11171.
The ultrasonic bath can be used for cleaning. Ultrasonic cleaning is especially suitable for intricate/fragile objects such as glassware, metal instruments, sensors and similar items. The bath incorporates high power piezoelectric transducers to maximise washing efficiency, and is capable of cleaning heavy deposits such as D86 flask residual.
Supplied with;
1 x cleaning basket
1 x tank lid
1 x instruction manual -
Vacuum or Pressure Air Pump – 20290-4
The Seta vacuum/pressure pump is a bench top air pump that generates either pressure or vacuum depending on the connections used. The pump is self-lubricating and includes an internal inlet air filter.
-
Vacuum Pump – 22422-6
Maximum vacuum 2 x 10^-2 mbar.
For use with the Setavap 2 Vapour Pressure Tester (81000-2). -
Vacuum Pump – 80004-0
Supplied with;
Tubing
Lubricating oil
Oil mist filter
Instruction manual -
Vacuum Pump – Series: 401464-03
Vacuum pump for Sindie, Clora, Phoebe, and Signal benchtop analyzers – see details tab for more information. Vacuum pump for Sindie, Clora, and Signal out-of-production benchtop analyzers (manufactured before 2012) – see details tab for more information.Package size UOM: EA -
Vacuum Pump and Accessory Kit – 14019-2
The kit contains a vacuum pump, pressure relief valve, connectors and pressure regulator. The valve is factory pre-set to 0.15 Mpa (1.5 Bar) for safety.
For use with the SetaFoam Dual Twin Foam Test Baths (14020-8).
-
Vacuum Pump and Regulator – 19725-2
A chemical duty oil-free diaphragm vacuum pump suitable for use for a wide range of laboratory applications. The built in pump uses a powerful motor and chemical resistant wetted materials including PTFE for long service intervals.
The pump has a maintenance-free drive system designed for continuous operation and proven long diaphragm life, along with minimal operation vibration and quiet running. The regulator / gauge allows vacuum regulation from atmospheric pressure down to 5 mbar whilst being able to monitor the vacuum level on the connected dial gauge. Suitable for applications such as vacuum filtration and gas sampling.
-
Vacuum Pump Rebuild Kit – 200337-01
Vacuum pump rebuild kit for any vacuum pump. Used with Sindie benchtop & online, Clora benchtop & online, Phoebe and Signal benchtop analyzers – see details tab for more information.
-
Valve – 17510-003
Vent Valve for use with the Grease Worker range when bleeding the worker cup and inserting the thermometer.
-
Vapour Pressure Gauge 0 to 1750 kPa – 22560-0
Bourdon-Tube type pressure gauge with 150 mm diameter mirror band dials to eliminate paralax errors while reading. The graduations are marked in kPa and psi (lbf/in2).
The gauge has a bottom entry 1/4 inch BSP fitting and a heavy duty stainless steel case with a large carrying handle suitable for lifting a complete pressure vessel assembly from a bath.
The gauge conforms to EN837 S2 (up to 2500 kPa), Accuracy Class 1 ±1% fsd.
-
Vapour Pressure Gauge 0 to 2000 kPa – 22580-2
Bourdon-Tube type pressure gauge with 150 mm diameter mirror band dials to eliminate paralax errors while reading. The graduations are marked in kPa and psi (lbf/in2).
The gauge has a bottom entry 1/4 inch BSP fitting and a heavy duty stainless steel case with a large carrying handle suitable for lifting a complete pressure vessel assembly from a bath.
The gauge conforms to EN837 S2 (up to 2,500kPa), Accuracy Class 1 ±1% fsd.
-
Vapour Pressure Gauge 0 to 3500 kPa – 22561-0
Bourdon-Tube type pressure gauge with 150 mm diameter mirror band dials to eliminate paralax errors while reading. The graduations are marked in kPa and psi (lbf/in2).
The gauge has a bottom entry 1/4 inch BSP fitting and a heavy duty stainless steel case with a large carrying handle suitable for lifting a complete pressure vessel assembly from a bath.
The gauge conforms to EN837 S2 (up to 2500 kPa) or S3 (2500 kPa and above), Accuracy Class 1 ±1% fsd.