Showing 625–640 of 644 results
Comprises a vertical Test Specimen (11220-001) with a PTFE holder and PTFE beaker cover for testing synthetic oil samples.
For use with the Seta Rust Prevention Test Bath (11200-7).
Certification: Supplied with Certificate of Conformance.
For use with;
Seta Auto-Oxidation Stability Bath (15400-5)
Seta Oxi-Cor Bath (15550-3)
Oxi Solid Block Bath 4 Way (16670-0)
For use with the Vapour Pressure Bath (22210-4).
20 Litres of bath oil, for filling viscometer baths in the temperature range of 120 to 150 °C. Seta bath fluids are formulated to maximise the heat stability and efficiency of Seta baths. The low viscosity reduces formation and aids dissipation of bubbles.
20 Litres of bath oil, for filling viscometer baths in the temperature range of 40 to 85 °C. Seta bath fluids are formulated to maximise the heat stability and efficiency of Seta baths. The low viscosity reduces formation and aids dissipation of bubbles.
5 Litres of bath oil, for filling viscometer baths in the temperature range of 40 to 85 °C. Seta bath fluids are formulated to maximise the heat stability and efficiency of Seta baths. The low viscosity reduces formation and aids dissipation of bubbles.
20 Litres of bath oil, for filling viscometer baths in the temperature range of 80 to 120 °C. Seta bath fluids are formulated to maximise the heat stability and efficiency of Seta baths. The low viscosity reduces formation and aids dissipation of bubbles.
The Viscometer Tube Cleaner is a fast and efficient instrument that will clean all current types of viscometer tube internally and externally.
Up to six viscometer tubes can be suspended in the cleaning chamber. Solvent vapours, heated to 80 C, permeate the viscometer tubes, condensing on the internal and external surfaces, dissolving any residues from samples passed through the tube during a test.
A water fed cooling coil at the top of the chamber causes the vapour to continually condense and return to the receiver, minimising solvent loss.
For use with the KV-10 (84300-0) Viscometer Bath to hold 13 mm tube size, for Cannon-Fenske viscometers. The number of holders required will depend on the bath.
For use with the KV-10 (84300-0) Viscometer Bath to hold 15 mm tube size, for U-tube reverse flow viscometers. The number of holders required will depend on the bath.
For use with the KV-6 (84200-3) and KV-2 (94710-3) Viscometer baths to hold 11 mm tube size, for Ubbelhode & Suspended Level viscometers. The number of holders required will depend on the bath.
For use with the KV-10 (84300-0) Viscometer Bath to hold 11 mm tube size, for Ubbelhode & Suspended Level viscometers. The number of holders required will depend on the bath.
For use with;
Seta Auto-Oxidation Stability Bath (15400-5)
Seta Oxi-Cor Bath (15550-3)
Oxidation Vessel (15802-2)
Oxi Solid Block Bath 4 Way (16670-0)
For use with;
Seta Auto-Oxidation Stability Bath (15400-5)
Seta Oxi-Cor Bath (15550-3)
Oxidation Vessel (15802-2)
Oxi Solid Block Bath 4 Way (16670-0)
Waste container for use with the Setavap 2 Vapour Pressure Tester (81000-2).
Pack of 5 water cups for use with the Seta Extraction Apparatus (21300-0).
Office:
12692 Sandy Drive
Suite 116
Granger, IN 46530