Showing 97–112 of 641 results
-
Clarcel CBL or Filter Cel
SCHMIDT + HAENSCH certified diatomaceous earth filter aid. Filter Cel (grey) and Clarcel CBL/CBL3 (grey or pink), is exploited in open-cast mines in France and USA (White Hills of Lompoc, California) and is intended to be used only as a filter aid for the processing of sugar cane/sugar beet juices to gain analyzing samples for the determination of sugar content by polarimetric measurement at 589/882nm in our Polartronic and Saccharomat models.
ID-N°08961 – Celite 512
ID-N°08957 – Filter Cel
-
Pressure filter paper for laboratory
Whatman® qualitative filter paper: These extremely strong filter papers have a high wet strength due to the addition of a small quantity of chemically stable resin. Normal qualitative applications will not introduce any significant impurities into the filtrate. The resins do, however, contain nitrogen so these grades should not be used in Kjeldahl estimations, etc. Some wet strengthened grades are available in folded (prepleated) forms.
ID-N° 12128 – 150mm diameter
ID-N° 12634 – 140mm diameter
-
For use with the Cylindrical Metal Diffuser and Tube (14023-0), which is an accessory for the SetaFoam Dual Twin Foam Test Baths (14020-8).
-
For use with;
Spherical Diffuser and Tube (14021-0)
Both are accessories for the SetaFoam Dual Twin Foam Test Baths (14020-8).
-
Pack of 6 x 12.5 ml Centrifuge Tubes for use with the Seta Oil Test Centrifuge (90000-3 & 90100-0).
-
1.6 µm encapsulated filters for performing tests in accordance with IP 387 and D2068 Procedure B. Supplied in a pack of 98 with certificate of verification.
-
Refractive index standards by SCHMIDT + HAENSCH with high precision over the whole temperature and wavelength range. The reference liquids are traceable to PTB standards and allow for high-quality verification, calibrating or testing of your refractometer. You can find more information at “Specifications”, and you are welcome to contact us to request more reference materials.
-
Temperature compensated sugar reference solution with different concentrations
Reference materials (also refractive index standard) by Schmidt + Haensch with high precision over the whole temperature and wavelength range. The reference liquids are traceable to PTB standards and allow for high-quality verification, calibrating, or testing of your refractometer. You can find more information at “Specifications”, and you are welcome to contact us to request more reference materials.
ID-N° see in specifications below
-
Pressure gauge adaptor for use with the CFBT Pressure Gauge (91662-0).
-
Start Up Kit for use with the Cold Filter Blocking Tester (91670-2).
For 50 tests, includes 100 test filters & 2 glass beakers. Note: x 2 test filters are used per sample.
-
For use with;
Seta Oxi-Cor Bath (15550-3)
Seta Pressure Gauge (15600-0)
Oxi Solid Block Bath 4 Way (16670-0)
-
Flow-through chemical measurements
This tube allows for flow-through measurements of aggressive chemicals with a small sample volume. All VariPol tubes are equipped with a temperature sensor and connection cable to the measuring instrument.
ID-N° 16272
ID-N° 16271
-
For use with;
Seta Rust Prevention Test Bath (11200-7)
Grinding and Polishing Rig (11275-4)
-
Stainless steel compact thermostatic bath with built-in stirrer and pump to enable use as a circulator for external apparatus.
-
Stainless steel compact thermostatic bath with built-in stirrer and pump, which enables it be used as a circulator for external apparatus.
For use with the Air Release Value System (15840-0).
-
A clamp for holding glassware. The three fingered jaw is padded to protect and grip the glassware and has a fully open capacity of 90 mm.
