Charging lead – Low Pressure – 15620-2
For use with;
Seta Oxi-Cor Bath (15550-3)
Seta Pressure Gauge (15600-0)
Oxi Solid Block Bath 4 Way (16670-0)
Showing all 12 results
-
-
Copper Corrosion Kit for Diesel, Fuel Oil and Lubricants – 11518-0
The copper corrosion kit comprises all of the accessories required to carry out tests on diesel, fuel oil and lubricants to ASTM D130, IP 154 and BS EN ISO 2160, BS2000-154, ISO 2160 standards. Quantities are sufficient for running two tests simultaneously.
For use with;
Seta Cu-Ag Corrosion Bath (11300-2)
High Temperature Ag-Cu Corrosion Bath (11305-2)
Seta Copper Corrosion Block Bath (11308-0)
Seta Oxi-Cor Bath (15550-3)
Silver and Copper Corrosion Bath (11400-7) -
Copper Corrosion Kit for Gasoline and Jet Fuel – 11517-0
The copper corrosion kit comprises all of the accessories required to carry out tests on gasoline and avtur to ASTM D130, IP 154 and BS EN ISO 2160, BS2000-154, ISO 2160 standards. Quantities are sufficient for running two tests simultaneously.
For use with;
Seta Copper Silver Block Bath (11310-0)
Seta Copper Silver Corrosion Liquid Bath (11405-0)
Seta Oxi-Cor Bath (15550-3) -
Copper Corrosion Kit for Grease – 11519-0
The copper corrosion kit comprises all of the accessories required to carry out tests on grease to ASTM D4048 and BS2000-112, IP 112 standards. Quantities are sufficient for running two tests simultaneously.
For use with;
Seta Cu-Ag Corrosion Bath (11300-2)
High Temperature Ag-Cu Corrosion Bath (11305-2)
Silver and Copper Corrosion Bath (11400-7)
Seta Oxi-Cor Bath (15550-3) -
Oxidation Vessel – 15802-2
An oxidation pressure vessel with a safety burst disc assembly and discharge tube in accordance with ASTM D525, D873, IP 40 and IP 138.
For use with;
Seta Auto-Oxidation Stability Bath (15400-5)
Seta Oxi-Cor Bath (15550-3)
Oxidation Vessel (15802-2)
Oxi Solid Block Bath 4 Way (16670-0) -
Seta Auto-Oxi Control System – 15452-2
The Seta Auto-Oxi control system provides automatic monitoring of up to four pressure test vessels and is designed for use with all water or dry block temperature baths that conform to the test method specifications.
High quality pressure transducers (not included) and system components ensure reliable operation and fully traceable results.
The Auto-Oxi system is supplied programmed with pressure / time test profiles for ASTM D525, IP 40 and ISO 7536 allowing rapid test selection and start. Custom test profiles, sample and operator identities are easily programmed.
-
Seta Pressure Gauge – 15600-0
An oxygen safe pressure gauge with a range of 0 to 1400kPa (0 to 200psi).
For use with;
Seta Oxi-Cor Bath (15550-3)
Oxidation Vessel (15802-2) -
Silver Corrosion Test Kit for Gasoline – 11515-0
The silver corrosion kit comprises all the accessories required to carry out tests on gasoline to ASTM D7671 and IP 611 standards. Supplies allow for running two tests simultaneously.
Suitable for Procedure A and B.
-
Thin Silver Strip Corrosion Kit – 11516-0
This Stanhope-Seta kit comprises all of the accessories required to carry out tests on gasoline to the ASTM D7667 standard. Supplies allow for running two tests simultaneously.
Suitable for Procedure A and B.
For use with;
Seta Cu-Ag Corrosion Bath (11300-2)
High Temperature Ag-Cu Corrosion Bath (11305-2)
Seta Copper Silver Block Bath (11310-0)
Silver and Copper Corrosion Bath (11400-7)
Seta Oxi-Cor Bath (15550-3) -
Transducer, 0 to 1600 kPa – 15455-3
Used for auto pressure monitoring, one required for each test vessel in use. Provided with a USB output.
For use with the Seta Auto-Oxi Control System (15452-2).
-
Viscometer Bath Oil 120 – 150 °C (20 litres) – 94632-0
20 Litres of bath oil, for filling viscometer baths in the temperature range of 120 to 150 °C. Seta bath fluids are formulated to maximise the heat stability and efficiency of Seta baths. The low viscosity reduces formation and aids dissipation of bubbles.
-
Viscometer Bath Oil 40 – 85 °C (20 litres) – 94633-0
20 Litres of bath oil, for filling viscometer baths in the temperature range of 40 to 85 °C. Seta bath fluids are formulated to maximise the heat stability and efficiency of Seta baths. The low viscosity reduces formation and aids dissipation of bubbles.