Showing all 11 results
Hand held tachometer with quartz crystal micro-controller and optical (non-contact) sensor, which measures a wide speed range to a high degree of accuracy. Large LCD display with a choice of display units, minimum/maximum and memory functions.
Supplied with;
Carry case
Reflecting tape
Certificate of conformity
Certificate of calibration available upon request.
A portable instrument designed to provide quick and accurate calibration of thermocouple and RTD temperature probes.
The probe calibrator is managed by a temperature controller system, incorporating a heater and a precision sensor housed in the aluminium block. You can set the temperature in 0.1 °C increments. The current temperature of the block and the set temperature display on the LCD screen.
Supplied with: mains lead, instruction manual and calibration certificate (traceable calibration).
Heat Sink Compound for the calibration of the Seta PM-93 Pensky Martens Flash Point Tester’s (35000-0) temperature probe.
Produced in general accordance with the principles of ISO 17034 and ISO 33405, the Multi Test Certified Reference Material (CRM) Gas Oil provides certified values for multiple test methods and has been characterised using a network of competent laboratories to provide international traceability. It is a highly cost effective solution to help meet verification requirements for audited laboratories and those which comply with ISO 17025.
The Multi Test CRM Gas Oil is supplied with full documentation including Safety Data Sheet (SDS), in tamper evident security packaging. It comes with a 1.5 year shelf life from date of manufacture.
Pack size: 500 mL.
Produced in general accordance with the principles of ISO 17034 and ISO 33405, the Multi Test Verification Material (MTVM) Fuel Oil provides certified values for multiple test methods and has been characterised using a network of competent laboratories to provide international traceability. It is a highly cost effective solution to help meet verification requirements for audited laboratories and those which comply with ISO 17025.
The MTVM Fuel Oil is supplied with full documentation including Safety Data Sheet (SDS), in tamper evident security packaging. It comes with a 2 year shelf life from date of manufacture.
Pack size: 500 mL.
Produced in general accordance with the principles of ISO 17034 and ISO 33405, the Multi Test Verification Material (MTVM) Gas Oil provides certified values for multiple test methods and has been characterised using a network of competent laboratories to provide international traceability. It is a highly cost effective solution to help meet verification requirements for audited laboratories and those which comply with ISO 17025.
The MTVM Gas Oil is supplied with full documentation including Safety Data Sheet (SDS), in tamper evident security packaging. It comes with a 2 year shelf life from date of manufacture.
Pack size: 500 mL.
The SETA-CRM Pensky-Martens Flash Point is produced under our ISO 17034 UKAS accreditation, ensuring it meets the highest standards as a Certified Reference Material. This hydrocarbon mixture carries certification for Flash Point determination (ASTM D93, IP 34, ISO 2719) and Density measurement (ASTM D4052).
An Interlaboratory Study characterises the reference material, guaranteeing international traceability and lower-than-average uncertainty. Laboratories seeking ISO 17025 compliance will find this cost-effective solution simplifies verification processes.
The Pensky-Martens Certified Reference Material is supplied in a tamper-evident security package with full documentation, including a Safety Data Sheet (SDS). It has a three-year shelf life from the date of manufacture.
The SETA-CRM Pensky-Martens Flash Point is produced under our ISO 17034 UKAS accreditation, ensuring it meets the highest standards as a Certified Reference Material. This hydrocarbon mixture carries certification for Flash Point determination (ASTM D93, IP 34, ISO 2719) and Density measurement (ASTM D4052).
An Interlaboratory Study characterises the reference material, guaranteeing international traceability and lower-than-average uncertainty. Laboratories seeking ISO 17025 compliance will find this cost-effective solution simplifies verification processes.
The Pensky-Martens Certified Reference Material is supplied in a tamper-evident security package with full documentation, including a Safety Data Sheet (SDS). It has a three-year shelf life from the date of manufacture.
The SETA-CRM Pensky-Martens Flash Point is produced under our ISO 17034 UKAS accreditation, ensuring it meets the highest standards as a Certified Reference Material. This hydrocarbon mixture carries certification for Flash Point determination (ASTM D93, IP 34, ISO 2719) and Density measurement (ASTM D4052).
An Interlaboratory Study characterises the reference material, guaranteeing international traceability and lower-than-average uncertainty. Laboratories seeking ISO 17025 compliance will find this cost-effective solution simplifies verification processes.
The Pensky-Martens Certified Reference Material is supplied in a tamper-evident security package with full documentation, including a Safety Data Sheet (SDS). It has a three-year shelf life from the date of manufacture.
Temperature Calibration Extension for the calibration of the Seta PM-93 Pensky Martens Flash Point Tester’s (35000-0) temperature probe.
High accuracy PT100 thermometer, for checking the calibration and accuracy of Vapour Pressure Testers (81000-2) as well as other temperature sources.
Office:
12692 Sandy Drive
Suite 116
Granger, IN 46530