-
The Flow Verification Kit is used with the Micro Carbon Residue Tester (MCRT) (97400-3), to enable the user to verify the flow rate of nitrogen during the test stages.
The kit consists of a 150 mm glass scale VA flowmeter on a stand, supplied with a length of plastic tube that when connected to the MCRT in place of the existing mass flow meter will show the actual nitrogen flow rate during the test cycle.
The Flow Verification Kit should only to be used by a Seta trained partner.
The VA flowmeter is supplied with a two point UKAS certificated of calibration for the two specific gas flow rates 160 ml/min and 600 ml/min.
-
Produced in general accordance with the principles of ISO 17034 and ISO 33405, the Multi Test Verification Material (MTVM) Fuel Oil provides certified values for multiple test methods and has been characterised using a network of competent laboratories to provide international traceability. It is a highly cost effective solution to help meet verification requirements for audited laboratories and those which comply with ISO 17025.
The MTVM Fuel Oil is supplied with full documentation including Safety Data Sheet (SDS), in tamper evident security packaging. It comes with a 2 year shelf life from date of manufacture.
Pack size: 500 mL.
-
The Temperature Verification Kit enables you to verify the operational oven temperature of the Micro Carbon Residue Tester (MCRT) (97400-3).
The kit consists of an oven lid which incorporates an iron constantan thermocouple, when placed on top of the MCRT oven the internal oven temperature can be seen during the test.
The temperature is displayed on a hand held portable digital thermometer which is supplied with a UKAS calibration certificate at the prescribed 500 °C test temperature.
