DigiFlow Mass Flowmeter – 14012-0
A Single electronic flowmeter with full digital control and display for highly accurate measurement of flow ranges from 10 mln/min to 100 mln/min (sccm). The flowmeters provide a clear indication of actual flow rate (bar graph and value), desired flow units, type of gas as well as totalized flow.
For use with the SetaFoam Dual Twin Foam Test Baths (14020-8).
Features
- Bright, wide-angle OLED display
- Free of parallax error
- Virtually independent of temperature and pressure variations
- Low-pressure drop
- Fast response
- Digitally calibrated
Please note two flowmeters will need to be purchased to enable a single flowmeter for each test bath.
Specifications
ACCURACY | ± 2% RD for flow > 50% of max. capacity ± (1% RD + 0.5% FS) on lower flows |
---|---|
REPEATABILITY | < 0.2% FS typical |
PRE-INSTALLED GASES | Air, N2, O2, and CO |
STANDARD CALIBRATION GAS | Air, other gases are converted using our Fluidat® conversion model which will introduce extra inaccuracy |
RANGEABILITY | up to 1:20 |
OPERATING PRESSURE | 0 to 10 bar(g) / 0 to 150 psi(g) |
PRESSURE COEFFICIENT | 0.2% / bar typical at Air |
OPERATING TEMPERATURE | 0 to 50 °C (32 to 122 °F) |
ATTITUDE SENSITIVITY | < 0.1% FS |
RESPONSE TIME (T63%) | 2 s |
CCCN CODE | Tariff 90269000 |