MTVM – Kerosene 500 ml – 99850-0
Produced in general accordance with the principles of ISO 17034 and ISO Guide 35, the Multi Test Verification Material (MTVM) Kerosene provides certified values for multiple test methods and has been characterized using a network of competent laboratories to provide international traceability. It is a highly cost effective solution to help meet verification requirements for audited laboratories and those which comply with ISO 17025.
Multi Test Verification Materials (MTVMs) allow routine monitoring of instrument performance and are also particularly helpful in training personnel on new equipment and test methods. The purchase of MTVMs is recommended with new instrumentation to assist with installation and commissioning.
Incorrect determination of a result can have far reaching financial and safety implications. The growing use of automated instrumentation increases the possibility that incorrect results may go undetected and in addition the early indication of bias is a useful warning to minimise production ‘giveaway’.
Seta MTVMs are unique because, unlike most other certified reference materials that are only suitable for validating a specific parameter/value, Seta MTVMs enable a user to validate different tests and instrumentation using the same sample material.
Certification: the Multi Test Verification Material (MTVM) Kerosine is supplied with a certificate of measurement which gives the certified value for each test method covered by the material.
Suitable for use with a number of Seta instruments including the Setastill Distillation (11860-3) and the Auto-Abel Flash Point Tester (34200-2).
Methods: ASTM D86, ASTM D445-IP 71, ASTM D1322, ASTM D2386-IP 16, ASTM D3227-IP 342, ASTM D3242-IP 354, ASTM D4052, ASTM D6379, ASTM D7153, ASTM D7154, IP 57, IP 123, IP 156
Features
- Cost effective solution to verification requirements
- Cross-check instrument performance
- Assistance for operator training
- Supports full compliance to ASTM, IP, CEN, and ISO test methods
- Supplied with full documentation including SDS
- Tamper evident security packaging
Specifications
| Distillation IBP | Range: 140 to 180 °C Amount/test: 100 mL |
|---|---|
| Distillation 10% | Range: 159 to 188 °C Amount/test: 100 mL |
| Distillation 50% | Range: 183 to 218 °C Amount/test: 100 ml |
| Distillation 90% | Range: 220 to 252 °C Amount/test: 100 mL |
| Distillation FBP | Range: 241 to 269 °C Amount/test: 100 mL |
| Distillation Residue | Range: 1.1 to 1.3% vol Amount/test: 100 mL |
| Distillation Loss | Range: 0.4 to 0.8% vol Amount/test: 100 mL |
| Flash Point | Range: 35 to 60 °C Amount/test: 85 mL |
| Freezing Point | Range: -62 to -43 °C Amount/test: 25 mL |
| Aromatics HPLC | Range: 0.7 to 50% vol Amount/test: 2.5 mL |
| Smoke Point | Range: 20 to 25 mm Amount/test: 20 mL |
| Kin Vis -20°C | Range: 2 to 8 mm2/s Amount/test: 20 mL |
| Acid Number | Range: <0.100 mg KOH/g Amount/test: 100 mL |
| Mercaptans | Range: 0.0003 to 0.0100 %(m/m) Amount/test: 40 mL |
| CCCN Code | Tariff 38229000 |