Seta Reid Vapour Pressure Bath – 22210-4

The Seta Reid Vapor Pressure Bath is a floor standing water bath specifically designed for the determination of vapor pressure with Seta Reid or Seta Vapour pressure cylinders.

Methods: ASTM D323 PROCEDURES A & C & D, ASTM D1267, ASTM D4953 PROCEDURE A, IP 69 PROCEDURES A & C & D, IP 410, BS EN ISO 4256 & BS 2000-410, BS ISO 3007 & BS 2000-69

Features

  • Accepts up to 6 pressure cylinder assemblies
  • Temperature range ambient +5 °C to 90 °C (194 °F) ± 0.1 °C
  • Uniformity better than ± 0.1 °C @ 37.8 °C ( ± 0.2 °F @ 100 °F)
  • Digital temperature control
  • Low fluid level and over-temperature protection

The stainless steel 80-liter water bath has a temperature range of ambient +5 °C to 90 °C and can achieve a test temperature of 37.8 °C (100 °F) with uniformity of ±0.1 °C (0.2 °F).

A programmable, digitally controlled thermostir unit combines the functions of the heater, temperature controller, timer and stirrer. The thermostir unit is equipped with a RS 232 port, a switched output for an external relay, a socket for an external PT100 temperature probe and alarms and cut-outs for low fluid level and over-temperature.

The 22210-4 will accept up to four 22410-0 and up to six 22400-0 Seta Vapour Pressure Cylinder / Ullage Chamber assemblies.

Supplied with:
4 pressure cylinder mounting brackets
Mains lead
Instruction manual

TEST TEMPERATURE RANGE ambient +5 °C to 90 °C (9 °F below ambient to 194 °F)
TEMPERATURE UNIFORMITY ± 0.1 °C @ 37.8 °C
BATH VOLUME 80 litre
BATH FLUID Water (De-ionised)
CYLINDER CAPACITY Up to 6 cylinder assemblies
VOLTAGE 220/240 V, 50/60 Hz
POWER 2000 W
SIZE (HXWXD) 770 x 550 x 510 mm
WEIGHT 70 kg
CCCN CODE Tariff 84198998

Lazar Scientific is your reliable source for Vapor Pressure Testing Equipment.