Setaflash Series 3 Open Cup Tester, 31000-0

The Setaflash Series 3 Open Cup Flash Point Tester is an easy to use instrument for flash/no flash, finite determinations or sustained combustion tests. Similar in design to the 30000-0 Setaflash 3, the instrument allows testing at any specific temperature within a range of ambient to 300°C.

Methods: ASTM D4206, BS 3900-A11, CFR 49-173.120, CLP Regulations EC No 1272/2008, IATA Dangerous Goods Regs. Section 3.3.5, IP 602, ISO 9038, UN Class 3 Test L2

A manually operated flame sweeping arm is fitted to the cup of the Series 3 flash point tester and gas is supplied from the integral tank via the control valve. The flash or sustained combustion characteristics of the sample are observed visually by passing the test flame over the sample.

Supplied with: 2ml syringe, igniter, test flame height gauge, mains lead, and instruction manual.

  • Ambient to 300°C
  • Flash point test in less than 2 minutes
  • Small sample size – 2ml
  • Audible and on-screen prompts
  • Portable operation
  • Simple calibration
Temperature range Ambient to 300°C
Sample Size 2ml
Test time 1 minute for flash points up to 100°C 2 minutes for flash points above 100°C
Temperature measurement Default values: 0.5°C resolution 0.5°C accuracy
Cup Material Blackened Aluminium
Voltage 110/120V or 220/240V, 50/60Hz (switchable) or 12V using optional power supply
Size (HxWxD) 26 x 28 x 26cm
Weight 5 kg
CCCN Code: Tariff 90268020