-

The copper corrosion kit comprises all of the accessories required to carry out tests on diesel, fuel oil and lubricants to ASTM D130, IP 154 and BS EN ISO 2160, BS2000-154, ISO 2160 standards. Quantities are sufficient for running two tests simultaneously.
For use with;
Seta Silver and Copper Corrosion Bath (11405-0)
-

The copper corrosion kit comprises all of the accessories required to carry out tests on gasoline and avtur to ASTM D130, IP 154 and BS EN ISO 2160, BS2000-154, ISO 2160 standards. Quantities are sufficient for running two tests simultaneously.
For use with;
Seta Copper Silver Block Bath (11310-0)
Seta Copper Silver Corrosion Liquid Bath (11405-0)
Seta Oxi-Cor Bath (15550-3)
-

The copper corrosion kit comprises all of the accessories required to carry out tests on grease to ASTM D4048 and BS2000-112, IP 112 standards. Quantities are sufficient for running two tests simultaneously.
For use with;
Seta Cu-Ag Corrosion Bath (11300-2)
High Temperature Ag-Cu Corrosion Bath (11305-2)
Silver and Copper Corrosion Bath (11400-7)
Seta Oxi-Cor Bath (15550-3)
-

The silver corrosion kit comprises all the accessories required to carry out tests on gasoline to ASTM D7671 and IP 611 standards. Supplies allow for running two tests simultaneously.
Suitable for Procedure A and B.
-

Holds test tube in Cu/Ag Corrosion Bath (11405-0).
-

This Stanhope-Seta kit comprises all of the accessories required to carry out tests on gasoline to the ASTM D7667 standard. Supplies allow for running two tests simultaneously.
Suitable for Procedure A and B.
For use with;
Seta Cu-Ag Corrosion Bath (11300-2)
High Temperature Ag-Cu Corrosion Bath (11305-2)
Seta Copper Silver Block Bath (11310-0)
Silver and Copper Corrosion Bath (11400-7)
Seta Oxi-Cor Bath (15550-3)
-

20 Litres of bath oil, for filling viscometer baths in the temperature range of 40 to 85 °C. Seta bath fluids are formulated to maximise the heat stability and efficiency of Seta baths. The low viscosity reduces formation and aids dissipation of bubbles.
-

20 Litres of bath oil, for filling viscometer baths in the temperature range of 80 to 120 °C. Seta bath fluids are formulated to maximise the heat stability and efficiency of Seta baths. The low viscosity reduces formation and aids dissipation of bubbles.
-

For use with Stanhope-Seta test baths and steam generators, to minimise scale production. Suitable for a domestic water supply, 60 l/hr maximum flow. Comprises a disposable cartridge and a capacity for 960 litre soft water or 180 litre hard water.