Setaflash Series 8 ActiveCool Flash Point Tester – 82100-2
The Setaflash Series 8 ActiveCool, closed cup flash point tester provides fast and reliable flash point results with a wide temperature range of -30 to 135 °C with no external cooling required.
With the Series 8, a test takes less than 2 minutes using just a 2 or 4 ml sample size. A simple user interface with color digital display and touchscreen icons guides you through the straightforward testing process. For easy record keeping the instrument stores 100,000 test results which can be saved and transferred via a USB port.
Designed for precise and accurate tests, barometric pressure is measured by an internal barometer and correction is automatically applied to the test result. Unknown samples can be tested using ramp mode.
Please note, 82100-2 is comparable to ASTM D3278, ASTM D7236, IP 524 and IP 534, however, to be fully compliant a gas ignition should be used. Please see Setaflash Series 8 Flash Point Tester HighTemp – Gas Ignitor – 82050-0
Methods: ASTM D3278, ASTM D3828, ASTM D7236, ASTM D8174, ASTM E502, IP 523, IP 534, BS EN ISO 3679 & BS 2000-523, CLP REGULATIONS EC NO 1272/2008, EPA 1020 B, ISO 3679, ISO 3680 (OBS)
- Simple test procedure
- Compact, rugged design
- Electric ignition
- Automated flash detection
- Ramp mode for unknown samples
- Automatic barometric pressure correction
- Peltier heating and cooling
- Fire detection (alarm and relay)
- USB port and result storage
Ease of use:
All functions on the Series 8 including test parameters, instrument status and test results are accessed via the touchscreen display. An audible prompt sounds when a flash is achieved and an automatic flash detector enhances repeatability.
Peltier cells prevent the instrument from overheating, whilst a fire sensor immediately stops the test and cools the sample cup if a fire is detected.
Calibration and verification:
Calibration of the Series 8 can be performed in the field, eliminating the costs and time associated with sending the instrument to a service centre.
Service and maintenance:
The rugged design ensures minimal operational maintenance in needed.
|TEMPERATURE RANGE||-30 to 135 °C|
|TEMPERATURE SELECTION||°C or °F|
|HEATING/COOLING METHOD||Peltier cell|
|TEMPERATURE RAMP MODE||Automatic or custom settings (ramp rate up to 10 °C/min)|
|SAMPLE CUP MATERIAL||Aluminium|
|DATA STORAGE||1 GB|
|VOLTAGE||110 to 250 Vac, 50/60 Hz|
|SIZE (HXWXD)||300 x 340 x 380 mm|
Accessories, Spares, Calibration, and Training
Pelican™ Storm Case™ for the Setaflash Series 8, CASE-SERIES8
Seta Solid Sample Dispenser – 13747-0
Syringe 4 ml (Small Scale Flash Point Instruments) – 13770-311
Syringe 2 ml (Small Scale Flash Point Instruments) – 13740-009
Small Scale Certified Flash Point Material (50 ml) – 99878-3
Insulating Lid – 82103-2
Serial Printer – 80602-0
Flash Detector for Series 8 – 82000-201
High Temperature Ignitor for Series 8 and Series 3 – 82000-202
Sample Well O-ring, Viton (pack of 5) – 82150-001
Reference Thermometer – 51000-0-LSI
Shutter Spring (Pack of 5) – 82100-201