Seta Silver and Copper Corrosion Bath – 11405-0

The Seta Silver and Copper Corrosion Bath is a bench top, stainless steel water or oil bath. Digitally controlled to ±0.1 °C over a temperature range of ambient +5 °C to 150 °C, the bath is used to determine the corrosive effects of fuels, lubricants and other hydrocarbon products on copper and silver.

The bath features 6 test stations, each with a lid and hook for suspending a Corrosion Pressure Vessel (11500-0) or a test tube Support Assembly (11422-0). You can use any combination of copper corrosion vessels, and test tube supports for maximum test flexibility.

Methods: ASTM D130, ASTM D4048, ASTM D7667, ASTM D7671, IP 112, IP 154, IP 611, BS EN ISO 2160 & BS 2000-154 & ISO 2160, DIN EN ISO 2160, ISO 2160

Download Brochure

Request a Quote

Features

Ambient +5 to 150 °C
19-litre bath
6 test stations
Programmable digital temperature controller
Digital timer
Over temperature cut out and liquid level float switch
Maximum liquid level outlet fitting
Small footprint

Ease of use:
All functions on the Silver and Copper Corrosion bath are accessed via the dial and indicator icons are shown on the colour display of the thermostir.

Enhanced safety:
Safety features include a float-operated low liquid level cut out. Users are made aware if the level of liquid in the bath falls below the allowable level with a warning display on the thermostir screen and an audible alarm, the heater automatically switches off.
An adjustable over-temperature cut out protects the instrument from overheating. If the bath temperature exceeds the over-temperature cut out temperature, again a warning displays on the thermostir screen, an audible alarm sounds and the heater automatically switches off.

Calibration and verification:
Calibration of the Corrosion Bath can be performed in the field, eliminating the costs and time associated with sending the instrument to a service centre.

Service and maintenance:
The rugged design ensures minimal operational maintenance is needed.

Supplied with: 6 x lids, mains lead, instruction manual.

TEMPERATURE RANGE	Ambient +5 to 150 °C
STABILITY	±0.1 °C
BATH FLUID	Water or Oil
BATH CAPACITY	19 litres
APERTURES	6 x 52 mm
HEATER POWER	1500 W
VOLTAGE	110/120 V, 50/60 Hz 200/220 V, 50/60 Hz
SIZE (HXWXD)	51 x 23 x 46 cm
WEIGHT	13.3 kg
CCCN CODE	Tariff 84198998